Changes

New and revised materials and properties in MPDB v9.57 as compared to v9.55

Key to property symbols (number of datasets):

D = Density	DLL = Linear thermal expansion (dL/L)
MTE = Mean coefficient of thermal expansion	CTE = Coefficient of thermal expansion (CTE)
E = Elastic/Young's modulus	G = Shear modulus
v = Poisson's ratio	K = Bulk modulus
TC = Thermal conductivity	TD = Thermal diffusivity
SH = Specific heat	HC = Heat capacity
SSC = True stress-strain curve (tension)	SSCC = True stress-strain curve (compression)
UTS = Tensile strength	YS = Yield strength (tension)
UCS = Compressive strength	YSC = Yield strength (compression)
%El = Elongation	SR = Stress rupture
FEN = Fatigue e-N curve	FSN = Fatigue S-N curve
CRS = Creep strength	IC = Isochronous creep
HE = Hemispherical total emissivity	NE = Normal total emissivity
VP = Vapor pressure	Vis = Viscosity
ST = Surface tension	RHO = Electrical resistivity
SIGMA = Electrical conductivity	SV = Specific volume
AV = Apparent viscosity	FM = Flexural modulus
FS = Flexural strength	ESSC = Engineering stress-strain curve (tension)
ESSCC = Engineering stress-strain curve (compression)	CRM = Creep modulus
RPB = Relative permeability	AP = Absolute permeability
BH = B-H curve	HB = H-B curve
CL = Core loss	EP = Exciting Power
DCRPT = Relative permittivity	DF = Dissipation factor
RIW = Refractive index vs WL	RIT = Refractive index vs T

N indicates the data is new, R indicates the data has been revised, * indicates the data is the RT value only

52 new materials, 770 new property sets, 20 revised properties, and 403 new RT values

17-4 PH	18 MAR 300	201	316L	316LN
360.0	4% Si ductile iron (3.2 C - 4 Si - 0.3 Mn)	410	4130	420
5083	5754	6082	7075 (Revised)	8 Ni steel (New)
800DH (New)	A383 (New)	AE44	Al - 1 Li (3.8 a/o Li)	AlCoCrFeNi₂_.₁ (New)
API X65 pipeline steel (New)	ASME P92 (9 Cr - 0.5 Mo - 2 W)	AZ31	AZ61	CarTech ACUBE 100 Alloy
CarTech BioBlu 27 Alloy	CarTech BioDur CCM Alloy	CarTech BioDur CCM Plus Alloy	Co₃₀Cr₂₅Ni₂₅Fe₂₀	CoCrFeMnNi
CoCrFeNi	Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ + 1 a/o Al (New)	Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ + 2.5 a/o Al (New)	Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ + 4 a/o Al (New)	Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ (New)
CrFeNiMn (New)	CrNiMoWMnV (New)	D2	Docol S355 (New)	DP 450
DP 600	DP 780	DP 800	DP 820 (New)	DP 980
Ductile iron (EN-GJV-350) (3.6 C - 1.8 Si - 0.9 Cu - 0.4 Mn) (New)	Ductile iron (EN-GJV-400) (3.38 C - 1.9 Si - 1 Cu - 0.4 Mn) (New)	Ductile Ni-Resist D-5S	DyCa₄O(BO₃)₃ (New)	EOS StainlessSteel CX (New)
ErCa₄O(BO₃)₃ (New)	Fe - 11 Ni - 6.5 Si - 2.5 Cr (New)	Fe - 18 Mn - 0.3 C (New)	Fe - 35 Mn (New)	Fe₄₂Mn₂₈Co₁₀Cr₁₅Si₅ (New)
Fe₄₉_.₅Mn₃₀Co₁₀Cr₁₀C₀_.₅ (New)	Fe₅₀Mn₃₀Co₁₀Cr₁₀ (New)	Fe₆₁(CoNi)₂₉Cr₁₀ (New)	Fe₇₈Al₁₀V₁₂ (New)	Fe₈₄Al₈V₈ (New)
Flake graphite (3 C - 2 Si - 0.3 Mo - 0.7 Cr - 0.7 Mn)	freeze cast Ti foam (51% porosity) (New)	freeze cast Ti foam (63% porosity) (New)	freeze cast Ti foam (68% porosity) (New)	H13
Haynes 282	IC21 (New)	IN-738LC	Incoloy 904 (904L)	Incoloy MA 956
Inconel 713LC	Inconel 718	Inconel HX / Hastelloy X / Nimonic PE13	LaCa₄O(BO₃)₃ (New)	M2
M42	Marlock C1650 (New)	Mg₉₆_.₇₅Zn₀_.₈₅Y₂_.₀₅Al₀_.₃₅ (New)	Ni₂₁Fe₂₅Co₂₃Cr₂₉Mo₂ (New)	Ni₂₅Fe₂₇Co₂₆Cr₂₁Mo₂ (New)
Ni₂₅Fe₂₈Co₂₉Cr₁₇Mo (New)	Ni-Ti (Nitinol)	PBT (New)	QP 1180 (New)	QP 980 (3GAHSS)
RR2450 (New)	S700 (New)	SiMo1000 ductile iron (3.5 C - 3 Al - 2.6 Si - 1 Mo)	SiMo51 ductile iron (3.2 C - 4.5 Si - 1 Mo)	SUPREMAX 217XG (New)
SUPREMAX 225XE (New)	SUPREMAX 225XF (New)	Ti - 6 Al - 4 V (Grade 5)	Ti - 6 Al - 4 V	Ti Grade 4
Ti-150A (Ti - 3 Cr - 2 Fe) (Revised)	Ti60 (New)	Timetal 834 (Revised)	TiZrNbHfTa (New)	TiZrNbV (New)
TRIP 700	TWIP steel 8 Mn - 0.8 Al - 0.1 C (New)	TWIP steel 8 Mn - 2.3 Al - 1.3 Si - 0.4 C (New)	UNS C11000 (ETP)	UNS S29108
UNS S31050	UNS S31254	UNS S32654	UNS S32760 / J93380	UNS S42010
W - 7 Ni - 3 Fe	W7 (New)	YCa₄O(BO₃)₃ (New)	YSS YXR7	Zr₄₁Ti₁₄Cu₁₂_.₅Ni₁₀Be₂₂_.₅ (New)

17-4 PH

    E     (N*):    laser powder bed fusion : 1027|3|2|-1
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, as-built, vertical : 1027|4|1|0
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, as-built, horizontal : 1027|4|1|1
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, H900, vertical : 1027|4|1|2
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, H900, horizontal : 1027|4|1|3
    UTS   (N*):    laser powder bed fusion : as-built, vertical : 1027|5|2|0
    UTS   (N*):    laser powder bed fusion : as-built, horizontal : 1027|5|2|1
    UTS   (N*):    laser powder bed fusion : H900, vertical : 1027|5|2|2
    UTS   (N*):    laser powder bed fusion : H900, horizontal : 1027|5|2|3
    YS    (N*):    laser powder bed fusion : as-built, vertical : 1027|13|2|0
    YS    (N*):    laser powder bed fusion : as-built, horizontal : 1027|13|2|1
    YS    (N*):    laser powder bed fusion : H900, vertical : 1027|13|2|2
    YS    (N*):    laser powder bed fusion : H900, horizontal : 1027|13|2|3
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, vertical, total strain amplitude : 1027|14|0|0
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, vertical, elastic strain amplitude : 1027|14|0|1
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, vertical, plastic strain amplitude : 1027|14|0|2
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, horizontal, total strain amplitude : 1027|14|0|3
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, horizontal, elastic strain amplitude : 1027|14|0|4
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, horizontal, plastic strain amplitude : 1027|14|0|5
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, H900, vertical, total strain amplitude : 1027|14|0|6
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, H900, vertical, elastic strain amplitude : 1027|14|0|7
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, H900, vertical, plastic strain amplitude : 1027|14|0|8
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, H900, horizontal, total strain amplitude : 1027|14|0|9
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, H900, horizontal, elastic strain amplitude : 1027|14|0|10
    %El   (N*):    laser powder bed fusion : as-built, vertical : 1027|29|2|0
    %El   (N*):    laser powder bed fusion : as-built, horizontal : 1027|29|2|1
    %El   (N*):    laser powder bed fusion : H900, vertical : 1027|29|2|2
    %El   (N*):    laser powder bed fusion : H900, horizontal : 1027|29|2|3

return to listing

18 MAR 300

    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, axial, equivalent stress amplitude : 2979|6|1|0
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, torsion, equivalent stress amplitude : 2979|6|1|1
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, as-built, biaxial, equivalent stress amplitude : 2979|6|1|2
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0.1, as-built, biaxial + mean, equivalent stress amplitude : 2979|6|1|3

return to listing

201

    SSC    (N):    2 mm (0.0787 inch) thick sheet, longitudinal : tested at 20 °C (68 °F), as-received, 0.001/s : 1240|4|4|0
    SSC    (N):    2 mm (0.0787 inch) thick sheet, longitudinal : tested at 20 °C (68 °F), 700 °C (1292 °F) for 10 min, 0.001/s : 1240|4|4|1

return to listing

316L

    E     (N*):    laser powder bed fusion : 0 degrees about Z-axis, measured in accordance with ISO 6892-1 : 1260|3|1|0
    E     (N*):    laser powder bed fusion : 45 degrees about Z-axis, measured in accordance with ISO 6892-1 : 1260|3|1|1
    E     (N*):    laser powder bed fusion : 90 degrees about Z-axis, measured in accordance with ISO 6892-1 : 1260|3|1|2
    E     (N*):    laser powder bed fusion : 0 degrees about Z-axis, measured in accordance with ASTM E1876 : 1260|3|1|3
    E     (N*):    laser powder bed fusion : 45 degrees about Z-axis, measured in accordance with ASTM E1876 : 1260|3|1|4
    E     (N*):    laser powder bed fusion : 90 degrees about Z-axis, measured in accordance with ASTM E1876 : 1260|3|1|5
    E     (N*):    laser powder bed fusion : 0 degrees about Z-axis, average of ISO and ASTM methods : 1260|3|1|6
    E     (N*):    laser powder bed fusion : 45 degrees about Z-axis, average of ISO and ASTM methods : 1260|3|1|7
    E     (N*):    laser powder bed fusion : 90 degrees about Z-axis, average of ISO and ASTM methods : 1260|3|1|8
    SSC    (N):    cold-rolled sheet, quenched and annealed : tested at 20 °C (68 °F), unknown strain rate : 1260|4|4|0
    SSC    (N):    as-received cold-rolled sheet (probably annealed) : tested at 20 °C (68 °F), 2 x 10⁻⁴/s : 1260|4|5|0
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 1 x 10⁻⁴/s, as-built, Eskandari Sabzi et. al. : 1260|4|7|8
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, as-built, Edin et. al. : 1260|4|7|9
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, 1 h at 600 °C (1112 °F), Edin et. al. : 1260|4|7|10
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, 1 h at 700 °C (1292 °F), Edin et. al. : 1260|4|7|11
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, 1 h at 800 °C (1472 °F), Edin et. al. : 1260|4|7|12
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, 1 h at 850 °C (1562 °F), Edin et. al. : 1260|4|7|13
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, 1 h at 900 °C (1652 °F), Edin et. al. : 1260|4|7|14
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, 1 h at 950 °C (1742 °F), Edin et. al. : 1260|4|7|15
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), unknown strain rate, 0 degrees about Z-axis, Charmi et. al. : 1260|4|7|16
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), unknown strain rate, 45 degrees about Z-axis, Charmi et. al. : 1260|4|7|17
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), unknown strain rate, 90 degrees about Z-axis, Charmi et. al. : 1260|4|7|18
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 2 x 10⁻⁴/s, as-built, Shin et. al. : 1260|4|7|19
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 2 x 10⁻⁴/s, 0.5 h at 1100 °C (2012 °F), Shin et. al. : 1260|4|7|20
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 2 x 10⁻⁴/s, HIPed 1.5 h at 1100 °C (2012 °F), Shin et. al. : 1260|4|7|21
    FSN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), R = -1, axial, solution annealed & quenched, 0 Pa (0 psi) mean stress, in air, stress amplitude : 1260|6|2|0
    FSN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), axial, solution annealed & quenched, 50 MPa (7.25 ksi) mean stress, in airstress amplitude : 1260|6|2|1
    FSN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), axial, solution annealed & quenched, -20 MPa (-2.90 ksi) mean stress, in airstress amplitude : 1260|6|2|2
    FSN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), R = -1, axial, solution annealed & quenched, 0 Pa (0 psi) mean stress, in water, stress amplitude : 1260|6|2|3
    FSN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), axial, solution annealed & quenched, 50 MPa (7.25 ksi) mean stress, in waterstress amplitude : 1260|6|2|4
    FSN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), axial, solution annealed & quenched, -20 MPa (-2.90 ksi) mean stress, in waterstress amplitude : 1260|6|2|5
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, vertical, as-built rod sample, maximum stress : 1260|6|3|4
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, vertical, as-built tubular sample, maximum stress : 1260|6|3|5
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, vertical, polished tubular sample, maximum stress : 1260|6|3|6
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, vertical, as-built, maximum stress : 1260|6|3|7
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, vertical, annealed at 900 °C (1652 °F) for 30 minutes, maximum stress : 1260|6|3|8
    FEN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), axial, solution annealed & quenched, in air, total strain amplitude : 1260|14|0|0
    FEN    (N):    hot finish hollow bar : tested at 288 °C (550 °F), axial, solution annealed & quenched, in water, total strain amplitude : 1260|14|0|1
    FEN    (N):    strain-hardened, effect of hydrogen : tested at 20 °C (68 °F), R = -1, axial, as-received, to initiation, plastic strain amplitude : 1260|14|1|0
    FEN    (N):    strain-hardened, effect of hydrogen : tested at 20 °C (68 °F), R = -1, axial, as-received, to failure, plastic strain amplitude : 1260|14|1|1
    FEN    (N):    strain-hardened, effect of hydrogen : tested at 20 °C (68 °F), R = -1, axial, H-precharged, to initiation, plastic strain amplitude : 1260|14|1|2
    FEN    (N):    strain-hardened, effect of hydrogen : tested at 20 °C (68 °F), R = -1, axial, H-precharged, to failure, plastic strain amplitude : 1260|14|1|3
    SR     (N):    hot-rolled sheet : tested at 600 °C (1112 °F) : 1260|22|0|0
    SR     (N):    hot-rolled sheet : tested at 650 °C (1202 °F) : 1260|22|0|1
    SR     (N):    hot-rolled sheet : Master curve (LMP) : 1260|22|0|2
    SR     (N):    laser powder bed fusion : tested at 600 °C (1112 °F) : 1260|22|1|0
    SR     (N):    laser powder bed fusion : tested at 650 °C (1202 °F) : 1260|22|1|1
    SR     (N):    laser powder bed fusion : Master curve (LMP) : 1260|22|1|2

return to listing

316LN

    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, vertical, total strain amplitude : 1261|14|4|0
    FEN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = -1, axial, diagonal, total strain amplitude : 1261|14|4|1

return to listing

360.0

    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, in the build plane, parallel to the build direction (XY), annealed at 300 °C (572 °F) : 108|4|0|0
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, in the build plane, 45 degrees to the build direction (XY), annealed at 300 °C (572 °F) : 108|4|0|1
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, in the build plane, perpendicular to the build direction (YX), annealed at 300 °C (572 °F) : 108|4|0|2
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, out-of-plane (XZ), annealed at 300 °C (572 °F) : 108|4|0|3
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, 45 degrees out-of-plane (XY), annealed at 300 °C (572 °F) : 108|4|0|4
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, 90 degrees out-of-plane (ZX), annealed at 300 °C (572 °F) : 108|4|0|5
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, as-built : 108|4|0|6
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 8.3 x 10⁻⁵/s, T6 temper : 108|4|0|7

return to listing

4% Si ductile iron (3.2 C - 4 Si - 0.3 Mn)

    FSN    (N):    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, maximum stress : 9288|6|0|0
    FEN    (N):    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, total strain amplitude : 9288|14|0|0

return to listing

410

    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, partitioned at 400 °C (752 °F), held 2 minutes : 1000|4|2|0
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, partitioned at 450 °C (842 °F), held 2 minutes : 1000|4|2|1
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, partitioned at 450 °C (842 °F), held 5 minutes : 1000|4|2|2

return to listing

4130

    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, as-quenched : 1102|4|10|0
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 350 °C (662 °F) : 1102|4|10|1
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 400 °C (752 °F) : 1102|4|10|2
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 430 °C (806 °F) : 1102|4|10|3
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 460 °C (860 °F) : 1102|4|10|4
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 490 °C (914 °F) : 1102|4|10|5
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 520 °C (968 °F) : 1102|4|10|6
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 0.0025/s, tempered 1 h at 550 °C (1022 °F) : 1102|4|10|7
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, as-quenched, H2 charged : 1102|4|10|8
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 350 °C (662 °F), H2 charged : 1102|4|10|9
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 400 °C (752 °F), H2 charged : 1102|4|10|10
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 430 °C (806 °F), H2 charged : 1102|4|10|11
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 460 °C (860 °F), H2 charged : 1102|4|10|12
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 490 °C (914 °F), H2 charged : 1102|4|10|13
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 520 °C (968 °F), H2 charged : 1102|4|10|14
    SSC    (N):    effects of H2 and temper : tested at 20 °C (68 °F), 1 x 10⁻⁶/s, tempered 1 h at 550 °C (1022 °F), H2 charged : 1102|4|10|15
    UTS   (N*):    effects of H2 and temper : as-quenched : 1102|5|5|0
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 350 °C (662 °F) : 1102|5|5|1
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 400 °C (752 °F) : 1102|5|5|2
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 430 °C (806 °F) : 1102|5|5|3
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 460 °C (860 °F) : 1102|5|5|4
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 490 °C (914 °F) : 1102|5|5|5
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 520 °C (968 °F) : 1102|5|5|6
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 550 °C (1022 °F) : 1102|5|5|7
    UTS   (N*):    effects of H2 and temper : as-quenched, H2 charged : 1102|5|5|8
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 350 °C (662 °F), H2 charged : 1102|5|5|9
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 400 °C (752 °F), H2 charged : 1102|5|5|10
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 430 °C (806 °F), H2 charged : 1102|5|5|11
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 460 °C (860 °F), H2 charged : 1102|5|5|12
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 490 °C (914 °F), H2 charged : 1102|5|5|13
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 520 °C (968 °F), H2 charged : 1102|5|5|14
    UTS   (N*):    effects of H2 and temper : tempered 1 h at 550 °C (1022 °F), H2 charged : 1102|5|5|15
    YS    (N*):    effects of H2 and temper : as-quenched : 1102|13|5|0
    YS    (N*):    effects of H2 and temper : tempered 1 h at 350 °C (662 °F) : 1102|13|5|1
    YS    (N*):    effects of H2 and temper : tempered 1 h at 400 °C (752 °F) : 1102|13|5|2
    YS    (N*):    effects of H2 and temper : tempered 1 h at 430 °C (806 °F) : 1102|13|5|3
    YS    (N*):    effects of H2 and temper : tempered 1 h at 460 °C (860 °F) : 1102|13|5|4
    YS    (N*):    effects of H2 and temper : tempered 1 h at 490 °C (914 °F) : 1102|13|5|5
    YS    (N*):    effects of H2 and temper : tempered 1 h at 520 °C (968 °F) : 1102|13|5|6
    YS    (N*):    effects of H2 and temper : tempered 1 h at 550 °C (1022 °F) : 1102|13|5|7
    YS    (N*):    effects of H2 and temper : as-quenched, H2 charged : 1102|13|5|8
    YS    (N*):    effects of H2 and temper : tempered 1 h at 350 °C (662 °F), H2 charged : 1102|13|5|9
    YS    (N*):    effects of H2 and temper : tempered 1 h at 400 °C (752 °F), H2 charged : 1102|13|5|10
    YS    (N*):    effects of H2 and temper : tempered 1 h at 430 °C (806 °F), H2 charged : 1102|13|5|11
    YS    (N*):    effects of H2 and temper : tempered 1 h at 460 °C (860 °F), H2 charged : 1102|13|5|12
    YS    (N*):    effects of H2 and temper : tempered 1 h at 490 °C (914 °F), H2 charged : 1102|13|5|13
    YS    (N*):    effects of H2 and temper : tempered 1 h at 520 °C (968 °F), H2 charged : 1102|13|5|14
    YS    (N*):    effects of H2 and temper : tempered 1 h at 550 °C (1022 °F), H2 charged : 1102|13|5|15
    %El   (N*):    effects of H2 and temper : as-quenched : 1102|29|0|0
    %El   (N*):    effects of H2 and temper : tempered 1 h at 350 °C (662 °F) : 1102|29|0|1
    %El   (N*):    effects of H2 and temper : tempered 1 h at 400 °C (752 °F) : 1102|29|0|2
    %El   (N*):    effects of H2 and temper : tempered 1 h at 430 °C (806 °F) : 1102|29|0|3
    %El   (N*):    effects of H2 and temper : tempered 1 h at 460 °C (860 °F) : 1102|29|0|4
    %El   (N*):    effects of H2 and temper : tempered 1 h at 490 °C (914 °F) : 1102|29|0|5
    %El   (N*):    effects of H2 and temper : tempered 1 h at 520 °C (968 °F) : 1102|29|0|6
    %El   (N*):    effects of H2 and temper : tempered 1 h at 550 °C (1022 °F) : 1102|29|0|7
    %El   (N*):    effects of H2 and temper : as-quenched, H2 charged : 1102|29|0|8
    %El   (N*):    effects of H2 and temper : tempered 1 h at 350 °C (662 °F), H2 charged : 1102|29|0|9
    %El   (N*):    effects of H2 and temper : tempered 1 h at 400 °C (752 °F), H2 charged : 1102|29|0|10
    %El   (N*):    effects of H2 and temper : tempered 1 h at 430 °C (806 °F), H2 charged : 1102|29|0|11
    %El   (N*):    effects of H2 and temper : tempered 1 h at 460 °C (860 °F), H2 charged : 1102|29|0|12
    %El   (N*):    effects of H2 and temper : tempered 1 h at 490 °C (914 °F), H2 charged : 1102|29|0|13
    %El   (N*):    effects of H2 and temper : tempered 1 h at 520 °C (968 °F), H2 charged : 1102|29|0|14
    %El   (N*):    effects of H2 and temper : tempered 1 h at 550 °C (1022 °F), H2 charged : 1102|29|0|15

return to listing

420

    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, partitioned at 450 °C (842 °F), quenched to 99 °C (210 °F) : 1003|4|0|0
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, partitioned at 450 °C (842 °F), quenched to 29 °C (84 °F) : 1003|4|0|1
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, quenched to 115 °C (239 °F), partitioned at 400 °C (752 °F) : 1003|4|0|2
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, quenched to 145 °C (293 °F), partitioned at 400 °C (752 °F) : 1003|4|0|3
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, quenched to 170 °C (338 °F), partitioned at 400 °C (752 °F) : 1003|4|0|4

return to listing

5083

    SSC    (N):    H112 temper, extruded rod : tested at 20 °C (68 °F), 3.33 x 10⁻⁴/s : 51|4|1|0
    SSC    (N):    H112 temper, extruded rod : tested at 100 °C (212 °F), 3.33 x 10⁻⁴/s : 51|4|1|1
    SSC    (N):    H112 temper, extruded rod : tested at 200 °C (392 °F), 3.33 x 10⁻⁴/s : 51|4|1|2
    SSC    (N):    H112 temper, multi-layer friction surfacing (MLFS) : tested at 20 °C (68 °F), 3.33 x 10⁻⁴/s : 51|4|2|0
    SSC    (N):    H112 temper, multi-layer friction surfacing (MLFS) : tested at 100 °C (212 °F), 3.33 x 10⁻⁴/s : 51|4|2|1
    SSC    (N):    H112 temper, multi-layer friction surfacing (MLFS) : tested at 200 °C (392 °F), 3.33 x 10⁻⁴/s : 51|4|2|2
    UTS    (N):    H112 temper : 25 mm (0.984 inch) diameter extruded rod : 51|5|2|0
    UTS    (N):    H112 temper : multi-layer friction surfacing (MLFS) : 51|5|2|1
    YS     (N):    H112 temper : 25 mm (0.984 inch) diameter extruded rod : 51|13|2|0
    YS     (N):    H112 temper : multi-layer friction surfacing (MLFS) : 51|13|2|1
    %El    (N):    H112 temper : 25 mm (0.984 inch) diameter extruded rod : 51|29|2|0
    %El    (N):    H112 temper : multi-layer friction surfacing (MLFS) : 51|29|2|1

return to listing

5754

    SSC    (N):    hot-extruded rod, as-received : tested at 20 °C (68 °F), 6.6 x 10⁻⁴/s : 63|4|3|0
    SSC    (N):    hot-extruded rod, as-received : tested at 200 °C (392 °F), 6.6 x 10⁻⁴/s : 63|4|3|1
    SSC    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 20 °C (68 °F), 6.6 x 10⁻⁴/s : 63|4|4|0
    SSC    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 200 °C (392 °F), 6.6 x 10⁻⁴/s : 63|4|4|1
    SSC    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 20 °C (68 °F), 6.6 x 10⁻⁴/s : 63|4|5|0
    SSC    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 200 °C (392 °F), 6.6 x 10⁻⁴/s : 63|4|5|1
    SSC    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 20 °C (68 °F), 6.6 x 10⁻⁴/s : 63|4|6|0
    SSC    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 200 °C (392 °F), 6.6 x 10⁻⁴/s : 63|4|6|1
    UTS    (N):    hot-extruded rod, as-received : tested at 6.6 x 10⁻⁴/s : 63|5|0|0
    UTS    (N):    hot-extruded rod, as-received : tested at 0.0066/s : 63|5|0|1
    UTS    (N):    hot-extruded rod, as-received : tested at 0.033/s : 63|5|0|2
    UTS    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 6.6 x 10⁻⁴/s : 63|5|1|0
    UTS    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 0.0066/s : 63|5|1|1
    UTS    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 0.033/s : 63|5|1|2
    UTS    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 6.6 x 10⁻⁴/s : 63|5|2|0
    UTS    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 0.0066/s : 63|5|2|1
    UTS    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 0.033/s : 63|5|2|2
    UTS    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 6.6 x 10⁻⁴/s : 63|5|3|0
    UTS    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 0.0066/s : 63|5|3|1
    UTS    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 0.033/s : 63|5|3|2
    YS     (N):    hot-extruded rod, as-received : tested at 6.6 x 10⁻⁴/s : 63|13|0|0
    YS     (N):    hot-extruded rod, as-received : tested at 0.0066/s : 63|13|0|1
    YS     (N):    hot-extruded rod, as-received : tested at 0.033/s : 63|13|0|2
    YS     (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 6.6 x 10⁻⁴/s : 63|13|1|0
    YS     (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 0.0066/s : 63|13|1|1
    YS     (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 0.033/s : 63|13|1|2
    YS     (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 6.6 x 10⁻⁴/s : 63|13|2|0
    YS     (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 0.0066/s : 63|13|2|1
    YS     (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 0.033/s : 63|13|2|2
    YS     (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 6.6 x 10⁻⁴/s : 63|13|3|0
    YS     (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 0.0066/s : 63|13|3|1
    YS     (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 0.033/s : 63|13|3|2
    %El    (N):    hot-extruded rod, as-received : tested at 6.6 x 10⁻⁴/s : 63|29|0|0
    %El    (N):    hot-extruded rod, as-received : tested at 0.0066/s : 63|29|0|1
    %El    (N):    hot-extruded rod, as-received : tested at 0.033/s : 63|29|0|2
    %El    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 6.6 x 10⁻⁴/s : 63|29|1|0
    %El    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 0.0066/s : 63|29|1|1
    %El    (N):    hot-extruded rod, upset at 20 °C (68 °F) for a strain of 1.65 : tested at 0.033/s : 63|29|1|2
    %El    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 6.6 x 10⁻⁴/s : 63|29|2|0
    %El    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 0.0066/s : 63|29|2|1
    %El    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7 : tested at 0.033/s : 63|29|2|2
    %El    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 6.6 x 10⁻⁴/s : 63|29|3|0
    %El    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 0.0066/s : 63|29|3|1
    %El    (N):    hot-extruded rod, ECAP at 150 °C (302 °F) for a total strain of 8.7, upset at 20 °C (68 °F) for a strain of 11 : tested at 0.033/s : 63|29|3|2

return to listing

6082

    SSC    (N):    0.001/s, T6 temper, sheet : tested at 20 °C (68 °F) : 12796|4|0|0
    SSC    (N):    0.001/s, wire : tested at 20 °C (68 °F), as-received : 12796|4|1|0
    SSC    (N):    0.001/s, wire : tested at 20 °C (68 °F), aged 10 h at 175 °C (347 °F) : 12796|4|1|1
    UTS   (N*):    T6 temper, sheet : 12796|5|0|-1
    YS    (N*):    T6 temper, sheet : 12796|13|0|-1
    %El   (N*):    T6 temper, sheet : 12796|29|0|-1

return to listing

7075

    SSC    (N):    effect of natural aging : tested at 20 °C (68 °F), aged 0 h at RT, unknown strain rate : 86|4|7|0
    SSC    (N):    effect of natural aging : tested at 20 °C (68 °F), aged 1 h at RT, unknown strain rate : 86|4|7|1
    SSC    (N):    effect of natural aging : tested at 20 °C (68 °F), aged 2 h at RT, unknown strain rate : 86|4|7|2
    SSC    (N):    effect of natural aging : tested at 20 °C (68 °F), aged 3 h at RT, unknown strain rate : 86|4|7|3
    SSC    (N):    effect of natural aging : tested at 20 °C (68 °F), aged 6 h at RT, unknown strain rate : 86|4|7|4
    SSC    (N):    effect of natural aging : tested at 20 °C (68 °F), aged 24 h at RT unknown strain rate : 86|4|7|5
    SSCC   (R):    T651 temper, 1/s : tested at 20 °C (68 °F) : 86|12|0|0
    SSCC   (R):    T651 temper, 1/s : tested at 100 °C (212 °F) : 86|12|0|1
    SSCC   (R):    T651 temper, 1/s : tested at 200 °C (392 °F) : 86|12|0|2
    SSCC   (R):    T651 temper, 1/s : tested at 300 °C (572 °F) : 86|12|0|3
    SSCC   (R):    T651 temper, 1/s : tested at 400 °C (752 °F) : 86|12|0|4
    SSCC   (R):    T651 temper, 1/s : tested at 500 °C (932 °F) : 86|12|0|5
    SSCC   (R):    T651 temper, 0.01/s : tested at 20 °C (68 °F) : 86|12|1|0
    SSCC   (R):    T651 temper, 0.01/s : tested at 100 °C (212 °F) : 86|12|1|1
    SSCC   (R):    T651 temper, 0.01/s : tested at 200 °C (392 °F) : 86|12|1|2
    SSCC   (R):    T651 temper, 0.01/s : tested at 300 °C (572 °F) : 86|12|1|3
    SSCC   (R):    T651 temper, 0.01/s : tested at 400 °C (752 °F) : 86|12|1|4
    SSCC   (R):    T651 temper, 0.01/s : tested at 500 °C (932 °F) : 86|12|1|5

return to listing

8 Ni steel (New)

    SSC       :    martensite : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s : 15116|4|0|0
    UTS   (*):    martensite : 15116|5|0|-1
    FSN       :    martensite : tested at 20 °C (68 °F), R = -1, axial, stress amplitude : 15116|6|0|0
    YS    (*):    martensite : 15116|13|0|-1
    %El   (*):    martensite : 15116|29|0|-1

return to listing

800DH (New)

    SSC       :    as-received, 1 x 10⁻⁴/s : tested at 20 °C (68 °F) : 15081|4|0|0
    SSC       :    as-received, 0.01/s : tested at 20 °C (68 °F) : 15081|4|1|0
    SSC       :    as-received, 0.5/s : tested at 20 °C (68 °F) : 15081|4|2|0
    SSC       :    as-received, 800/s : tested at 20 °C (68 °F) : 15081|4|3|0
    D     (*):    solid : 15081|24|0|-1

return to listing

A383 (New)

    DLL       :    solid : 15104|0|0|-1
    TC    (*):    solid : 15104|1|0|-1
    RHO   (*):    solid : 15104|2|0|-1
    SSC       :    die cast, as-cast : tested at 25 °C (77 °F), 6.7 x 10⁻⁴/s : 15104|4|0|0
    SSC       :    die cast, as-cast : tested at 200 °C (392 °F), 6.7 x 10⁻⁴/s : 15104|4|0|1
    SSC       :    die cast, as-cast : tested at 300 °C (572 °F), 6.7 x 10⁻⁴/s : 15104|4|0|2
    UTS       :    die cast : as-cast : 15104|5|0|0
    MTE       :    solid : 15104|8|0|-1
    SIGMA (*):    solid : 15104|10|0|-1
    YS        :    die cast : as-cast : 15104|13|0|0
    CTE       :    solid : 15104|16|0|-1
    D         :    solid : 15104|24|0|-1
    %El       :    die cast : as-cast : 15104|29|0|0

return to listing

AE44

    TC     (N):    solid : high pressure die cast, as-cast : 10215|1|0|0
    SH     (N):    solid : high pressure die cast, as-cast : 10215|9|0|0
    YS     (N):    high pressure die cast, as-cast : 10215|13|0|-1
    TD     (N):    solid : high pressure die cast, as-cast : 10215|25|0|0
    %El    (N):    high pressure die cast, as-cast : 10215|29|0|-1

return to listing

Al - 1 Li (3.8 a/o Li)

    SSC    (N):    1 x 10⁻⁴/s, equal-channel angular hydroextrusion (ECAH) : tested at -268.9 °C (-452.1 °F) : 10235|4|2|0
    SSC    (N):    1 x 10⁻⁴/s, equal-channel angular hydroextrusion (ECAH) : tested at -196.1 °C (-321.1 °F) : 10235|4|2|1
    SSC    (N):    1 x 10⁻⁴/s, equal-channel angular hydroextrusion (ECAH) : tested at 17 °C (62 °F) : 10235|4|2|2
    SSC    (N):    1 x 10⁻⁴/s, equal-channel angular hydroextrusion (ECAH) : tested at 127 °C (260 °F) : 10235|4|2|3
    UTS    (N):    equal-channel angular hydroextrusion (ECAH) : 10235|5|0|-1
    YS     (N):    equal-channel angular hydroextrusion (ECAH) : 10235|13|0|-1
    %El    (N):    equal-channel angular hydroextrusion (ECAH) : 10235|29|0|-1

return to listing

AlCoCrFeNi₂_.₁ (New)

    E         :    as-cast : 15077|3|0|-1
    SSC       :    as-cast : tested at 20 °C (68 °F), unknown strain rate, Shen et. al. : 15077|4|0|0
    SSC       :    as-cast : tested at -196.1 °C (-321.1 °F), 1 x 10⁻⁴/s, Jaladurgam et. al. : 15077|4|0|1
    SSC       :    as-cast : tested at 20 °C (68 °F), 1 x 10⁻⁴/s, Jaladurgam et. al. : 15077|4|0|2
    SSC       :    as-cast : tested at 400 °C (752 °F), 1 x 10⁻⁴/s, Jaladurgam et. al. : 15077|4|0|3
    SSC       :    as-cast : tested at 700 °C (1292 °F), 1 x 10⁻⁶/s, Jaladurgam et. al. : 15077|4|0|4
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s : 15077|4|1|0
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s, annealed 2.5 minutes at 800 °C (1472 °F) : 15077|4|1|1
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s, annealed 5 minutes at 800 °C (1472 °F) : 15077|4|1|2
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s, annealed 10 minutes at 800 °C (1472 °F) : 15077|4|1|3
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s, annealed 30 minutes at 800 °C (1472 °F) : 15077|4|1|4
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 8.3 x 10⁻⁴/s, annealed 120 minutes at 800 °C (1472 °F) : 15077|4|1|5
    UTS   (*):    as-cast : 15077|5|0|-1
    YS    (*):    as-cast : 15077|13|0|-1
    %El   (*):    as-cast : 15077|29|0|-1

return to listing

API X65 pipeline steel (New)

    DLL       :    solid : 15082|0|0|-1
    E         :    solid : 15082|3|0|-1
    SSC       :    in air : tested at 20 °C (68 °F), 0.001/s : 15082|4|0|0
    SSC       :    in vacuum : tested at 20 °C (68 °F), 0.001/s : 15082|4|1|0
    SSC       :    in-situ hydrogen charged : tested at 20 °C (68 °F), 0.001/s : 15082|4|2|0
    MTE       :    solid : 15082|8|0|-1
    SH        :    solid : 15082|9|0|-1
    G         :    solid : 15082|11|0|-1
    CTE       :    solid : 15082|16|0|-1
    v         :    solid : 15082|19|0|-1
    D         :    solid : 15082|24|0|-1
    K         :    solid : 15082|27|0|-1

return to listing

ASME P92 (9 Cr - 0.5 Mo - 2 W)

    FEN    (N):    normalized & tempered : tested at 300 °C (572 °F), R = -1, axial, total strain amplitude, Jurgens et. al. : 1196|14|1|12
    FEN    (N):    normalized & tempered : tested at 500 °C (932 °F), R = -1, axial, total strain amplitude, Jurgens et. al. : 1196|14|1|13
    FEN    (N):    normalized & tempered : tested at 620 °C (1148 °F), R = -1, axial, total strain amplitude, Jurgens et. al. : 1196|14|1|14
    FEN    (N):    thermo-mechanical fatigue : tested at 300 °C (572 °F) to 620 °C (1148 °F), axial, in-phase, total strain amplitude, Jurgens et. al. : 1196|14|2|0
    FEN    (N):    thermo-mechanical fatigue : tested at 300 °C (572 °F) to 620 °C (1148 °F), axial, out-of-phase, total strain amplitude, Jurgens et. al. : 1196|14|2|1
    FEN    (N):    thermo-mechanical fatigue : tested at 300 °C (572 °F) to 620 °C (1148 °F), axial, in-phase, 180 s hold, total strain amplitude, Jurgens et. al. : 1196|14|2|2
    FEN    (N):    thermo-mechanical fatigue : tested at 300 °C (572 °F) to 620 °C (1148 °F), axial, out-of-phase, 180 s hold, total strain amplitude, Jurgens et. al. : 1196|14|2|3

return to listing

AZ31

    SSC    (N):    0.001/s, extruded rod, annealed at 345 °C (653 °F) : tested at 20 °C (68 °F), axial : 1684|4|5|0
    SSC    (N):    0.001/s, extruded rod, annealed at 345 °C (653 °F) : tested at 20 °C (68 °F), radial : 1684|4|5|1
    SSCC   (N):    0.01/s, spray-deposited : tested at 350 °C (662 °F) : 1684|12|1|0
    SSCC   (N):    0.01/s, spray-deposited : tested at 375 °C (707 °F) : 1684|12|1|1
    SSCC   (N):    0.01/s, spray-deposited : tested at 400 °C (752 °F) : 1684|12|1|2
    SSCC   (N):    0.01/s, spray-deposited : tested at 425 °C (797 °F) : 1684|12|1|3
    SSCC   (N):    0.01/s, spray-deposited : tested at 450 °C (842 °F) : 1684|12|1|4
    SSCC   (N):    0.1/s, spray-deposited : tested at 350 °C (662 °F) : 1684|12|2|0
    SSCC   (N):    0.1/s, spray-deposited : tested at 375 °C (707 °F) : 1684|12|2|1
    SSCC   (N):    0.1/s, spray-deposited : tested at 400 °C (752 °F) : 1684|12|2|2
    SSCC   (N):    0.1/s, spray-deposited : tested at 425 °C (797 °F) : 1684|12|2|3
    SSCC   (N):    0.1/s, spray-deposited : tested at 450 °C (842 °F) : 1684|12|2|4
    SSCC   (N):    1/s, spray-deposited : tested at 350 °C (662 °F) : 1684|12|3|0
    SSCC   (N):    1/s, spray-deposited : tested at 375 °C (707 °F) : 1684|12|3|1
    SSCC   (N):    1/s, spray-deposited : tested at 400 °C (752 °F) : 1684|12|3|2
    SSCC   (N):    1/s, spray-deposited : tested at 425 °C (797 °F) : 1684|12|3|3
    SSCC   (N):    1/s, spray-deposited : tested at 450 °C (842 °F) : 1684|12|3|4
    SSCC   (N):    10/s, spray-deposited : tested at 350 °C (662 °F) : 1684|12|4|0
    SSCC   (N):    10/s, spray-deposited : tested at 375 °C (707 °F) : 1684|12|4|1
    SSCC   (N):    10/s, spray-deposited : tested at 400 °C (752 °F) : 1684|12|4|2
    SSCC   (N):    10/s, spray-deposited : tested at 425 °C (797 °F) : 1684|12|4|3
    SSCC   (N):    10/s, spray-deposited : tested at 450 °C (842 °F) : 1684|12|4|4
    SSCC   (N):    0.001/s, extruded rod, annealed at 345 °C (653 °F) : tested at 20 °C (68 °F), axial : 1684|12|5|0
    SSCC   (N):    0.001/s, extruded rod, annealed at 345 °C (653 °F) : tested at 20 °C (68 °F), radial : 1684|12|5|1

return to listing

AZ61

    SSC    (N):    solution treated at 420 °C (788 °F) : tested at 25 °C (77 °F), 0.001/s : 1685|4|0|0
    SSC    (N):    solution treated at 420 °C (788 °F) : tested at 180 °C (356 °F), 0.001/s : 1685|4|0|1
    UTS   (N*):    solution treated at 420 °C (788 °F) : 1685|5|2|-1
    YS    (N*):    solution treated at 420 °C (788 °F) : 1685|13|2|-1
    %El   (N*):    solution treated at 420 °C (788 °F) : 1685|29|2|-1
    CRS    (N):    2% strain, solution treated at 420 °C (788 °F) : tested at 180 °C (356 °F) : 1685|30|0|0
    CRS    (N):    3% strain, solution treated at 420 °C (788 °F) : tested at 180 °C (356 °F) : 1685|30|1|0
    CRS    (N):    4% strain, solution treated at 420 °C (788 °F) : tested at 180 °C (356 °F) : 1685|30|2|0
    CRS    (N):    5% strain, solution treated at 420 °C (788 °F) : tested at 180 °C (356 °F) : 1685|30|3|0
    IC     (N):    tested at 180 °C (356 °F), solution treated at 420 °C (788 °F) : 1 h : 1685|39|0|0
    IC     (N):    tested at 180 °C (356 °F), solution treated at 420 °C (788 °F) : 3 h : 1685|39|0|1
    IC     (N):    tested at 180 °C (356 °F), solution treated at 420 °C (788 °F) : 10 h : 1685|39|0|2
    IC     (N):    tested at 180 °C (356 °F), solution treated at 420 °C (788 °F) : 30 h : 1685|39|0|3
    IC     (N):    tested at 180 °C (356 °F), solution treated at 420 °C (788 °F) : 100 h : 1685|39|0|4

return to listing

CarTech ACUBE 100 Alloy

    E     (N*):    solid : 8945|3|0|-1
    UTS   (N*):    hot worked : typical value : 8945|5|0|0
    UTS   (N*):    warm worked : typical value : 8945|5|1|0
    UTS   (N*):    warm worked & aged : typical value : 8945|5|2|0
    G     (N*):    solid : 8945|11|0|-1
    YS    (N*):    hot worked : typical value : 8945|13|0|0
    YS    (N*):    warm worked : typical value : 8945|13|1|0
    YS    (N*):    warm worked & aged : typical value : 8945|13|2|0
    v     (N*):    solid : 8945|19|0|-1
    K     (N*):    solid : 8945|27|0|-1
    %El   (N*):    hot worked : typical value : 8945|29|0|0
    %El   (N*):    warm worked : typical value : 8945|29|1|0
    %El   (N*):    warm worked & aged : typical value : 8945|29|2|0

return to listing

CarTech BioBlu 27 Alloy

    E     (N*):    solid : 8947|3|0|-1
    UTS   (N*):    annealed : typical value : 8947|5|0|0
    UTS   (N*):    warm worked : typical value : 8947|5|1|0
    UTS   (N*):    hot worked : typical value : 8947|5|2|0
    G     (N*):    solid : 8947|11|0|-1
    YS    (N*):    annealed : typical value : 8947|13|0|0
    YS    (N*):    warm worked : typical value : 8947|13|1|0
    YS    (N*):    hot worked : typical value : 8947|13|2|0
    v     (N*):    solid : 8947|19|0|-1
    K     (N*):    solid : 8947|27|0|-1
    %El   (N*):    annealed : typical value : 8947|29|0|0
    %El   (N*):    warm worked : typical value : 8947|29|1|0
    %El   (N*):    hot worked : typical value : 8947|29|2|0

return to listing

CarTech BioDur CCM Alloy

    E     (N*):    solid : 8948|3|0|-1
    UTS   (N*):    annealed : typical value : 8948|5|0|0
    UTS   (N*):    warm worked : typical value : 8948|5|1|0
    UTS   (N*):    hot worked : typical value : 8948|5|2|0
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0, Kₜ = 1, axial, as-built, vertical, maximum stress : 8948|6|0|0
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0, Kₜ = 2.28, axial, as-built, vertical, maximum stress : 8948|6|0|1
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0, Kₜ = 1, axial, HT, vertical, maximum stress : 8948|6|0|2
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0, Kₜ = 2.28, axial, HT, vertical, maximum stress : 8948|6|0|3
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0, Kₜ = 1, axial, HIPed, vertical, maximum stress : 8948|6|0|4
    FSN    (N):    laser powder bed fusion : tested at 20 °C (68 °F), R = 0, Kₜ = 2.28, axial, HIPed, vertical, maximum stress : 8948|6|0|5
    G     (N*):    solid : 8948|11|0|-1
    YS    (N*):    annealed : typical value : 8948|13|0|0
    YS    (N*):    warm worked : typical value : 8948|13|1|0
    YS    (N*):    hot worked : typical value : 8948|13|2|0
    v     (N*):    solid : 8948|19|0|-1
    K     (N*):    solid : 8948|27|0|-1
    %El   (N*):    annealed : typical value : 8948|29|0|0
    %El   (N*):    warm worked : typical value : 8948|29|1|0
    %El   (N*):    hot worked : typical value : 8948|29|2|0

return to listing

CarTech BioDur CCM Plus Alloy

    E     (N*):    solid : 3111|3|0|-1
    G     (N*):    solid : 3111|11|0|-1
    v     (N*):    solid : 3111|19|0|-1
    K     (N*):    solid : 3111|27|0|-1

return to listing

Co₃₀Cr₂₅Ni₂₅Fe₂₀

    UTS   (N*):    cold-rolled, annealed at 600 °C (1112 °F) : 12278|5|0|-1
    UTS   (N*):    cold-rolled, annealed at 650 °C (1202 °F) : 12278|5|1|-1
    YS    (N*):    cold-rolled, annealed at 600 °C (1112 °F) : 12278|13|0|-1
    YS    (N*):    cold-rolled, annealed at 650 °C (1202 °F) : 12278|13|1|-1
    %El   (N*):    cold-rolled, annealed at 600 °C (1112 °F) : 12278|29|0|-1
    %El   (N*):    cold-rolled, annealed at 650 °C (1202 °F) : 12278|29|1|-1

return to listing

CoCrFeMnNi

    SSC    (N):    welded : tested at 20 °C (68 °F), 0.001/s, GMAW welded : 10216|4|1|0
    SSC    (N):    welded : tested at 20 °C (68 °F), 0.001/s, GTAW welded : 10216|4|1|1
    D     (N*):    solid : 10216|24|0|-1

return to listing

CoCrFeNi

    SSCC   (N):    cast : tested at 20 °C (68 °F), 0.01/s : 12279|12|0|0
    SSCC   (N):    cast : tested at 20 °C (68 °F), 10/s : 12279|12|0|1
    SSCC   (N):    cast : tested at 25 °C (77 °F), 2500/s : 12279|12|0|2
    SSCC   (N):    cast : tested at 100 °C (212 °F), 2500/s : 12279|12|0|3
    SSCC   (N):    cast : tested at 200 °C (392 °F), 2500/s : 12279|12|0|4
    SSCC   (N):    cast : tested at 25 °C (77 °F), 10500/s : 12279|12|0|5

return to listing

Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ + 1 a/o Al (New)

    TC        :    solid : 15106|1|0|-1
    SSC       :    annealed : tested at 20 °C (68 °F), 0.001/s : 15106|4|0|0
    D     (*):    solid : 15106|24|0|-1

return to listing

Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ + 2.5 a/o Al (New)

    TC        :    solid : 15107|1|0|-1
    SSC       :    annealed : tested at 20 °C (68 °F), 0.001/s : 15107|4|0|0
    SSC       :    annealed & recrystallized : tested at 20 °C (68 °F), 0.001/s, recrystallized 10 minutes at 800 °C (1472 °F), 2.6 micron grains : 15107|4|1|0
    SSC       :    annealed & recrystallized : tested at 20 °C (68 °F), 0.001/s, recrystallized 3 minutes at 900 °C (1652 °F), 5.1 micron grains : 15107|4|1|1
    SSC       :    annealed & recrystallized : tested at 20 °C (68 °F), 0.001/s, recrystallized 5 minutes at 900 °C (1652 °F), 5.7 micron grains : 15107|4|1|2
    SSC       :    annealed & recrystallized : tested at 20 °C (68 °F), 0.001/s, recrystallized 10 minutes at 900 °C (1652 °F), 6.7 micron grains : 15107|4|1|3
    D     (*):    solid : 15107|24|0|-1

return to listing

Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ + 4 a/o Al (New)

    TC        :    solid : 15108|1|0|-1
    SSC       :    annealed : tested at 20 °C (68 °F), 0.001/s : 15108|4|0|0
    D     (*):    solid : 15108|24|0|-1

return to listing

Cr₂₄Mn₆Fe₄₀Co₂₄Ni₆ (New)

    TC        :    solid : 15105|1|0|-1
    SSC       :    annealed : tested at 20 °C (68 °F), 0.001/s : 15105|4|0|0
    D     (*):    solid : 15105|24|0|-1

return to listing

CrFeNiMn (New)

    SSC       :    cast & HIPed : tested at 20 °C (68 °F), 0.001/s : 15093|4|0|0
    SSC       :    PECS sintered : tested at 20 °C (68 °F), 0.002/s, non-milled powder : 15093|4|1|0
    SSC       :    PECS sintered : tested at 20 °C (68 °F), 0.002/s, milled powder : 15093|4|1|1
    D     (*):    solid : 15093|24|0|-1

return to listing

CrNiMoWMnV (New)

    SSCC      :    forging, 0.01/s : tested at 850 °C (1562 °F) : 15079|12|0|0
    SSCC      :    forging, 0.01/s : tested at 950 °C (1742 °F) : 15079|12|0|1
    SSCC      :    forging, 0.01/s : tested at 1050 °C (1922 °F) : 15079|12|0|2
    SSCC      :    forging, 0.1/s : tested at 850 °C (1562 °F) : 15079|12|1|0
    SSCC      :    forging, 0.1/s : tested at 950 °C (1742 °F) : 15079|12|1|1
    SSCC      :    forging, 0.1/s : tested at 1050 °C (1922 °F) : 15079|12|1|2
    SSCC      :    forging, 1/s : tested at 850 °C (1562 °F) : 15079|12|2|0
    SSCC      :    forging, 1/s : tested at 950 °C (1742 °F) : 15079|12|2|1
    SSCC      :    forging, 1/s : tested at 1050 °C (1922 °F) : 15079|12|2|2
    SSCC      :    forging, 10/s : tested at 850 °C (1562 °F) : 15079|12|3|0
    SSCC      :    forging, 10/s : tested at 950 °C (1742 °F) : 15079|12|3|1
    SSCC      :    forging, 10/s : tested at 1050 °C (1922 °F) : 15079|12|3|2
    D     (*):    solid : 15079|24|0|-1

return to listing

D2

    UTS   (N*):    hardness HRC 32 : 2857|5|0|-1
    UTS   (N*):    hardness HRC 37 : 2857|5|1|-1
    UTS   (N*):    hardness HRC 42 : 2857|5|2|-1
    UTS   (N*):    hardness HRC 48 : 2857|5|3|-1
    UTS   (N*):    hardness HRC 58 : 2857|5|4|-1
    YS    (N*):    hardness HRC 32 : 0.2% offset : 2857|13|0|0
    YS    (N*):    hardness HRC 32 : 0.02% offset : 2857|13|0|1
    YS    (N*):    hardness HRC 37 : 0.2% offset : 2857|13|1|0
    YS    (N*):    hardness HRC 37 : 0.02% offset : 2857|13|1|1
    YS    (N*):    hardness HRC 42 : 0.2% offset : 2857|13|2|0
    YS    (N*):    hardness HRC 42 : 0.02% offset : 2857|13|2|1
    YS    (N*):    hardness HRC 48 : 0.2% offset : 2857|13|3|0
    YS    (N*):    hardness HRC 48 : 0.02% offset : 2857|13|3|1
    YS    (N*):    hardness HRC 58 : 0.2% offset : 2857|13|4|0
    YS    (N*):    hardness HRC 58 : 0.02% offset : 2857|13|4|1
    YSC   (N*):    hardness HRC 58 : 0.2% offset : 2857|21|0|0
    YSC   (N*):    hardness HRC 61 : 0.2% offset : 2857|21|1|0
    UCS   (N*):    hardness HRC 58 : 2857|47|0|-1
    UCS   (N*):    hardness HRC 61 : 2857|47|1|-1

return to listing

Docol S355 (New)

    DLL       :    solid : 15088|0|0|-1
    E         :    solid : 15088|3|0|-1
    SSC       :    2 mm (0.0787 inch) thick sheet, longitudinal : tested at 20 °C (68 °F), as-received, 0.001/s : 15088|4|0|0
    SSC       :    2 mm (0.0787 inch) thick sheet, longitudinal : tested at 20 °C (68 °F), 700 °C (1292 °F) for 10 min, 0.001/s : 15088|4|0|1
    MTE       :    solid : 15088|8|0|-1
    SH        :    solid : 15088|9|0|-1
    G         :    solid : 15088|11|0|-1
    CTE       :    solid : 15088|16|0|-1
    v         :    solid : 15088|19|0|-1
    D         :    solid : 15088|24|0|-1
    K         :    solid : 15088|27|0|-1

return to listing

DP 450

    UTS   (N*):    1.2 mm (0.0472 inch) sheet, 7 v/o martensite : 1142|5|0|-1
    YS    (N*):    1.2 mm (0.0472 inch) sheet, 7 v/o martensite : 1142|13|0|-1
    %El   (N*):    1.2 mm (0.0472 inch) sheet, 7 v/o martensite : 1142|29|0|-1

return to listing

DP 600

    SSC    (N):    1.6 mm (0.063 inch) sheet, 23 v/o martensite : tested at 20 °C (68 °F), 0.001/s : 1145|4|2|0
    UTS   (N*):    1.6 mm (0.063 inch) sheet, 23 v/o martensite : 1145|5|2|-1
    %El   (N*):    1.6 mm (0.063 inch) sheet, 23 v/o martensite : 1145|29|2|-1

return to listing

DP 780

    SSC    (N):    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, as-quenched : 1146|4|1|0
    SSC    (N):    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, reduced 80% : 1146|4|1|1
    SSC    (N):    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, reduced 80%, intercritical annealed at 780 °C (1436 °F) : 1146|4|1|2

return to listing

DP 800

    SSC    (N):    1.2 mm (0.0472 inch) sheet, 30 v/o martensite : tested at 20 °C (68 °F), 0.001/s : 1147|4|1|0
    SSC    (N):    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, as-quenched : 1147|4|2|0
    SSC    (N):    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, reduced 80% : 1147|4|2|1
    SSC    (N):    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, reduced 80%, intercritical annealed at 800 °C (1472 °F) : 1147|4|2|2
    UTS   (N*):    1.25 mm (0.0492 inch) sheet, 54 v/o martensite : 1147|5|0|-1
    UTS   (N*):    1.2 mm (0.0472 inch) sheet, 30 v/o martensite : 1147|5|1|-1
    YS    (N*):    1.25 mm (0.0492 inch) sheet, 54 v/o martensite : 1147|13|0|-1
    %El   (N*):    1.25 mm (0.0492 inch) sheet, 54 v/o martensite : 1147|29|0|-1
    %El   (N*):    1.2 mm (0.0472 inch) sheet, 30 v/o martensite : 1147|29|1|-1

return to listing

DP 820 (New)

    DLL       :    solid : 15103|0|0|-1
    E         :    solid : 15103|3|0|-1
    SSC       :    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, as-quenched : 15103|4|0|0
    SSC       :    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, reduced 80% : 15103|4|0|1
    SSC       :    Huang et. al. : tested at 20 °C (68 °F), 0.003/s, reduced 80%, intercritical annealed at 820 °C (1508 °F) : 15103|4|0|2
    MTE       :    solid : 15103|8|0|-1
    G         :    solid : 15103|11|0|-1
    CTE       :    solid : 15103|16|0|-1
    v         :    solid : 15103|19|0|-1
    D         :    solid : 15103|24|0|-1
    K         :    solid : 15103|27|0|-1

return to listing

DP 980

    SSC    (N):    1.4 mm (0.0551 inch) thick, hot-dip galvannealed sheet : tested at 25 °C (77 °F), 2 x 10⁻⁴/s : 1148|4|4|0
    SSC    (N):    1.4 mm (0.0551 inch) thick, hot-dip galvannealed sheet : tested at 100 °C (212 °F), 2 x 10⁻⁴/s : 1148|4|4|1
    SSC    (N):    1.4 mm (0.0551 inch) thick, hot-dip galvannealed sheet : tested at 175 °C (347 °F), 2 x 10⁻⁴/s : 1148|4|4|2
    SSC    (N):    1.4 mm (0.0551 inch) thick, hot-dip galvannealed sheet : tested at 250 °C (482 °F), 2 x 10⁻⁴/s : 1148|4|4|3

return to listing

Ductile iron (EN-GJV-350) (3.6 C - 1.8 Si - 0.9 Cu - 0.4 Mn) (New)

    FSN       :    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, maximum stress : 15118|6|0|0
    FEN       :    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, total strain amplitude : 15118|14|0|0

return to listing

Ductile iron (EN-GJV-400) (3.38 C - 1.9 Si - 1 Cu - 0.4 Mn) (New)

    FSN       :    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, maximum stress : 15119|6|0|0
    FEN       :    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, total strain amplitude : 15119|14|0|0

return to listing

Ductile Ni-Resist D-5S

    TC     (N):    solid : 10308|1|0|-1
    UTS    (N):    solid : 10308|5|0|-1
    FEN    (N):    heat-treated according to SS-EN 13835:2012 : tested at 800 °C (1472 °F), R = -1, axial, in Ar, total strain amplitude : 10308|14|0|1
    FEN    (N):    heat-treated according to SS-EN 13835:2012 : tested at 800 °C (1472 °F), R = -1, axial, in diesel exhaust, total strain amplitude : 10308|14|0|2

return to listing

DyCa₄O(BO₃)₃ (New)

    SH        :    solid : 15109|9|0|-1
    HC        :    solid : 15109|17|0|-1

return to listing

EOS StainlessSteel CX (New)

    DLL       :    solid : 15094|0|0|-1
    UTS   (*):    heat-treated state : vertical : 15094|5|0|0
    UTS   (*):    heat-treated state : horizontal : 15094|5|0|1
    FSN       :    laser powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, vertical, as-built, stress amplitude : 15094|6|0|0
    FSN       :    laser powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, vertical, as-built, machined surface, stress amplitude : 15094|6|0|1
    FSN       :    laser powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, vertical, heat-treated, stress amplitude : 15094|6|0|2
    FSN       :    laser powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, vertical, heat-treated, machined surface, stress amplitude : 15094|6|0|3
    FSN       :    laser powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, horizontal, heat-treated, machined surface, stress amplitude : 15094|6|0|4
    MTE       :    solid : 15094|8|0|-1
    YS    (*):    heat-treated state : vertical : 15094|13|0|0
    YS    (*):    heat-treated state : horizontal : 15094|13|0|1
    CTE       :    solid : 15094|16|0|-1
    D         :    solid : 15094|24|0|-1
    %El   (*):    heat-treated state : vertical : 15094|29|0|0
    %El   (*):    heat-treated state : horizontal : 15094|29|0|1

return to listing

ErCa₄O(BO₃)₃ (New)

    DLL       :    solid : 11 direction : 15112|0|0|0
    DLL       :    solid : 22 direction : 15112|0|0|1
    DLL       :    solid : 33 direction : 15112|0|0|2
    DLL       :    solid : 13 direction : 15112|0|0|3
    DLL       :    solid : polycrystal : 15112|0|0|4
    MTE       :    solid : 11 direction : 15112|8|0|0
    MTE       :    solid : 22 direction : 15112|8|0|1
    MTE       :    solid : 33 direction : 15112|8|0|2
    MTE       :    solid : 13 direction : 15112|8|0|3
    MTE       :    solid : polycrystal : 15112|8|0|4
    CTE       :    solid : 11 direction : 15112|16|0|0
    CTE       :    solid : 22 direction : 15112|16|0|1
    CTE       :    solid : 33 direction : 15112|16|0|2
    CTE       :    solid : 13 direction : 15112|16|0|3
    CTE       :    solid : polycrystal : 15112|16|0|4

return to listing

Fe - 11 Ni - 6.5 Si - 2.5 Cr (New)

    SSCC      :    5 x 10⁻⁴/s : tested at 700 °C (1292 °F) : 15070|12|0|0
    SSCC      :    5 x 10⁻⁴/s : tested at 800 °C (1472 °F) : 15070|12|0|1
    SSCC      :    5 x 10⁻⁴/s : tested at 900 °C (1652 °F) : 15070|12|0|2
    SSCC      :    5 x 10⁻⁴/s : tested at 1000 °C (1832 °F) : 15070|12|0|3
    SSCC      :    0.005/s : tested at 700 °C (1292 °F) : 15070|12|1|0
    SSCC      :    0.005/s : tested at 800 °C (1472 °F) : 15070|12|1|1
    SSCC      :    0.005/s : tested at 900 °C (1652 °F) : 15070|12|1|2
    SSCC      :    0.005/s : tested at 1000 °C (1832 °F) : 15070|12|1|3
    SSCC      :    0.05/s : tested at 700 °C (1292 °F) : 15070|12|2|0
    SSCC      :    0.05/s : tested at 800 °C (1472 °F) : 15070|12|2|1
    SSCC      :    0.05/s : tested at 900 °C (1652 °F) : 15070|12|2|2
    SSCC      :    0.05/s : tested at 1000 °C (1832 °F) : 15070|12|2|3

return to listing

Fe - 18 Mn - 0.3 C (New)

    SSC       :    520 °C (968 °F) anneal : tested at 20 °C (68 °F), 0.001/s, annealed for 2 minutes : 15098|4|0|0
    SSC       :    520 °C (968 °F) anneal : tested at 20 °C (68 °F), 0.001/s, annealed for 4 minutes : 15098|4|0|1
    SSC       :    520 °C (968 °F) anneal : tested at 20 °C (68 °F), 0.001/s, annealed for 8 minutes : 15098|4|0|2
    SSC       :    550 °C (1022 °F) anneal : tested at 20 °C (68 °F), 0.001/s, annealed for 2 minutes : 15098|4|1|0
    SSC       :    550 °C (1022 °F) anneal : tested at 20 °C (68 °F), 0.001/s, annealed for 4 minutes : 15098|4|1|1
    SSC       :    550 °C (1022 °F) anneal : tested at 20 °C (68 °F), 0.001/s, annealed for 8 minutes : 15098|4|1|2

return to listing

Fe - 35 Mn (New)

    SSC       :    0.45 microns : tested at 20 °C (68 °F), 0.001/s : 15092|4|0|0
    SSC       :    0.45 microns : tested at -180 °C (-292 °F), 0.001/s : 15092|4|0|1
    SSC       :    2 microns : tested at 20 °C (68 °F), 0.001/s : 15092|4|1|0
    SSC       :    2 microns : tested at -180 °C (-292 °F), 0.001/s : 15092|4|1|1
    SSC       :    2.3 microns : tested at 20 °C (68 °F), 0.001/s : 15092|4|2|0
    SSC       :    2.3 microns : tested at -180 °C (-292 °F), 0.001/s : 15092|4|2|1
    SSC       :    3.8 microns : tested at 20 °C (68 °F), 0.001/s : 15092|4|3|0
    SSC       :    3.8 microns : tested at -180 °C (-292 °F), 0.001/s : 15092|4|3|1
    SSC       :    10.8 microns : tested at 20 °C (68 °F), 0.001/s : 15092|4|4|0
    SSC       :    10.8 microns : tested at -180 °C (-292 °F), 0.001/s : 15092|4|4|1
    SSC       :    21 microns : tested at 20 °C (68 °F), 0.001/s : 15092|4|5|0
    SSC       :    21 microns : tested at -180 °C (-292 °F), 0.001/s : 15092|4|5|1
    UTS   (*):    Effect of grain size : 0.45 microns : 15092|5|0|0
    UTS   (*):    Effect of grain size : 2 microns : 15092|5|0|1
    UTS   (*):    Effect of grain size : 2.3 microns : 15092|5|0|2
    UTS   (*):    Effect of grain size : 3.8 microns : 15092|5|0|3
    UTS   (*):    Effect of grain size : 10.8 microns : 15092|5|0|4
    UTS   (*):    Effect of grain size : 21 microns : 15092|5|0|5
    YS    (*):    Effect of grain size : 0.45 microns : 15092|13|0|0
    YS    (*):    Effect of grain size : 2 microns : 15092|13|0|1
    YS    (*):    Effect of grain size : 2.3 microns : 15092|13|0|2
    YS    (*):    Effect of grain size : 3.8 microns : 15092|13|0|3
    YS    (*):    Effect of grain size : 10.8 microns : 15092|13|0|4
    YS    (*):    Effect of grain size : 21 microns : 15092|13|0|5
    %El   (*):    Effect of grain size : 0.45 microns, uniform elongation : 15092|29|0|0
    %El   (*):    Effect of grain size : 2 microns, uniform elongation : 15092|29|0|1
    %El   (*):    Effect of grain size : 2.3 microns, uniform elongation : 15092|29|0|2
    %El   (*):    Effect of grain size : 3.8 microns, uniform elongation : 15092|29|0|3
    %El   (*):    Effect of grain size : 10.8 microns, uniform elongation : 15092|29|0|4
    %El   (*):    Effect of grain size : 21 microns, uniform elongation : 15092|29|0|5

return to listing

Fe₄₂Mn₂₈Co₁₀Cr₁₅Si₅ (New)

    SSC       :    as-cast : tested at 20 °C (68 °F), 0.001/s : 15080|4|0|0
    SSC       :    as-welded, as-cast : tested at 20 °C (68 °F), 0.001/s : 15080|4|1|0
    UTS   (*):    as-cast : 15080|5|0|-1
    UTS   (*):    as-welded, as-cast : 15080|5|1|-1
    YS    (*):    as-cast : 15080|13|0|-1
    YS    (*):    as-welded, as-cast : 15080|13|1|-1
    %El   (*):    as-cast : 15080|29|0|-1
    %El   (*):    as-welded, as-cast : 15080|29|1|-1

return to listing

Fe₄₉_.₅Mn₃₀Co₁₀Cr₁₀C₀_.₅ (New)

    SSC       :    laser powder bed fusion : tested at 20 °C (68 °F), 3 x 10⁻⁴/s, Stripe flat : 15076|4|0|0
    SSC       :    laser powder bed fusion : tested at 20 °C (68 °F), 3 x 10⁻⁴/s, Stripe horizontal : 15076|4|0|1
    SSC       :    laser powder bed fusion : tested at 20 °C (68 °F), 3 x 10⁻⁴/s, Stripe vertical : 15076|4|0|2
    SSC       :    laser powder bed fusion : tested at 20 °C (68 °F), 3 x 10⁻⁴/s, Chessboard flat : 15076|4|0|3
    SSC       :    laser powder bed fusion : tested at 20 °C (68 °F), 3 x 10⁻⁴/s, Chessboard horizontal : 15076|4|0|4
    SSC       :    laser powder bed fusion : tested at 20 °C (68 °F), 3 x 10⁻⁴/s, Chessboard vertical : 15076|4|0|5
    UTS   (*):    laser powder bed fusion : Stripe flat : 15076|5|0|0
    UTS   (*):    laser powder bed fusion : Stripe horizontal : 15076|5|0|1
    UTS   (*):    laser powder bed fusion : Stripe vertical : 15076|5|0|2
    UTS   (*):    laser powder bed fusion : Chessboard flat : 15076|5|0|3
    UTS   (*):    laser powder bed fusion : Chessboard horizontal : 15076|5|0|4
    UTS   (*):    laser powder bed fusion : Chessboard vertical : 15076|5|0|5
    YS    (*):    laser powder bed fusion : Stripe flat : 15076|13|0|0
    YS    (*):    laser powder bed fusion : Stripe horizontal : 15076|13|0|1
    YS    (*):    laser powder bed fusion : Stripe vertical : 15076|13|0|2
    YS    (*):    laser powder bed fusion : Chessboard flat : 15076|13|0|3
    YS    (*):    laser powder bed fusion : Chessboard horizontal : 15076|13|0|4
    YS    (*):    laser powder bed fusion : Chessboard vertical : 15076|13|0|5
    %El   (*):    laser powder bed fusion : Stripe flat : 15076|29|0|0
    %El   (*):    laser powder bed fusion : Stripe horizontal : 15076|29|0|1
    %El   (*):    laser powder bed fusion : Stripe vertical : 15076|29|0|2
    %El   (*):    laser powder bed fusion : Chessboard flat : 15076|29|0|3
    %El   (*):    laser powder bed fusion : Chessboard horizontal : 15076|29|0|4
    %El   (*):    laser powder bed fusion : Chessboard vertical : 15076|29|0|5

return to listing

Fe₅₀Mn₃₀Co₁₀Cr₁₀ (New)

    SSC       :    as-cast base material : tested at 20 °C (68 °F), 1.64 x 10⁻⁵/s : 15072|4|0|0
    SSC       :    TIG welded : tested at 20 °C (68 °F), 1.64 x 10⁻⁵/s : 15072|4|1|0
    UTS   (*):    as-cast base material : 15072|5|0|-1
    UTS   (*):    TIG welded : 15072|5|1|-1
    %El   (*):    as-cast base material : 15072|29|0|-1
    %El   (*):    TIG welded : 15072|29|1|-1

return to listing

Fe₆₁(CoNi)₂₉Cr₁₀ (New)

    SSC       :    cold-rolled, annealed at 800 °C (1472 °F) : tested at 20 °C (68 °F), 0.001/s : 15069|4|0|0
    UTS   (*):    cold-rolled, annealed at 800 °C (1472 °F) : 15069|5|0|-1
    YS    (*):    cold-rolled, annealed at 800 °C (1472 °F) : 15069|13|0|-1
    %El   (*):    cold-rolled, annealed at 800 °C (1472 °F) : 15069|29|0|-1

return to listing

Fe₇₈Al₁₀V₁₂ (New)

    YS        :    annealed : 700 °C (1292 °F) for 0.37 h : 15083|13|0|0
    YS        :    annealed : over aged in vacuum at 700 °C (1292 °F) for 5 h : 15083|13|0|1
    YS        :    annealed : over aged in vacuum at 700 °C (1292 °F) for 72 h : 15083|13|0|2

return to listing

Fe₈₄Al₈V₈ (New)

    YS        :    hot-rolled : 15084|13|0|-1

return to listing

Flake graphite (3 C - 2 Si - 0.3 Mo - 0.7 Cr - 0.7 Mn)

    FSN    (N):    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, maximum stress : 354|6|0|0
    FEN    (N):    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, total strain amplitude : 354|14|0|0

return to listing

freeze cast Ti foam (51% porosity) (New)

    E     (*):    in compression : 15089|3|0|-1
    SSCC      :    0.001/s : tested at 20 °C (68 °F) : 15089|12|0|0
    YSC   (*):    solid : 15089|21|0|-1
    D     (*):    solid : 15089|24|0|-1
    UCS   (*):    solid : 15089|47|0|-1

return to listing

freeze cast Ti foam (63% porosity) (New)

    E     (*):    in compression : 15090|3|0|-1
    SSCC      :    0.001/s : tested at 20 °C (68 °F) : 15090|12|0|0
    SSCC      :    0.01/s : tested at 20 °C (68 °F) : 15090|12|1|0
    SSCC      :    0.5/s : tested at 20 °C (68 °F) : 15090|12|2|0
    YSC   (*):    solid : 15090|21|0|-1
    D     (*):    solid : 15090|24|0|-1
    UCS   (*):    solid : 15090|47|0|-1

return to listing

freeze cast Ti foam (68% porosity) (New)

    E     (*):    in compression : 15091|3|0|-1
    SSCC      :    0.001/s : tested at 20 °C (68 °F) : 15091|12|0|0
    YSC   (*):    solid : 15091|21|0|-1
    D     (*):    solid : 15091|24|0|-1
    UCS   (*):    solid : 15091|47|0|-1

return to listing

H13

    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 1 x 10⁻⁴/s, double tempered at 580 °C (1076 °F) : 2864|4|1|0
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.1/s, double tempered at 580 °C (1076 °F) : 2864|4|1|1
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 1 x 10⁻⁴/s, double tempered at 625 °C (1157 °F) : 2864|4|1|2
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.1/s, double tempered at 625 °C (1157 °F) : 2864|4|1|3

return to listing

Haynes 282

    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, as-received : 1936|4|1|0
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 10% cold worked : 1936|4|1|1
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 20% cold worked : 1936|4|1|2
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 30% cold worked : 1936|4|1|3
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 40% cold worked : 1936|4|1|4
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 50% cold worked : 1936|4|1|5
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 60% cold worked : 1936|4|1|6
    SSC    (N):    effect of cold work : tested at 20 °C (68 °F), 0.0064/s, 70% cold worked : 1936|4|1|7
    UTS   (N*):    annealed, effect of cold work on RT properties : annealed, 70% cold worked : 1936|5|2|7
    YS    (N*):    annealed, effect of cold work on RT properties : annealed, 70% cold worked : 1936|13|2|7
    %El   (N*):    annealed, effect of cold work on RT properties : annealed, 70% cold worked : 1936|29|2|7

return to listing

IC21 (New)

    SSC       :    electron beam powder bed fusion : tested at 20 °C (68 °F), parallel to build direction, 0.006/s : 15100|4|0|0
    SSC       :    electron beam powder bed fusion : tested at 1000 °C (1832 °F), parallel to build direction, 0.006/s : 15100|4|0|1
    UTS       :    electron beam powder bed fusion : parallel to build direction : 15100|5|0|0
    UTS       :    electron beam powder bed fusion : perpendicular to build direction : 15100|5|0|1
    YS        :    electron beam powder bed fusion : parallel to build direction : 15100|13|0|0
    YS        :    electron beam powder bed fusion : perpendicular to build direction : 15100|13|0|1
    D     (*):    solid : 15100|24|0|-1
    %El       :    electron beam powder bed fusion : parallel to build direction : 15100|29|0|0

return to listing

IN-738LC

    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, as-built : 10257|4|0|0
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, HIPed at 1000 °C (1832 °F), STA : 10257|4|0|1
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 0.001/s, HIPed at 1210 °C (2210 °F), STA : 10257|4|0|2

return to listing

Incoloy 904 (904L)

    SSC    (N):    cold-rolled sheet, quenched and annealed : tested at 20 °C (68 °F), unknown strain rate : 1080|4|0|0

return to listing

Incoloy MA 956

    SSC    (N):    transverse : tested at 200 °C (392 °F), 5 x 10⁻⁵/s, as-received : 1085|4|0|0
    SSC    (N):    transverse : tested at 200 °C (392 °F), 5 x 10⁻⁵/s, 100 h at 475 °C (887 °F) : 1085|4|0|1
    SSC    (N):    transverse : tested at 200 °C (392 °F), 5 x 10⁻⁵/s, 500 h at 475 °C (887 °F) : 1085|4|0|2
    SSC    (N):    transverse : tested at 200 °C (392 °F), 5 x 10⁻⁵/s, 1000 h at 475 °C (887 °F) : 1085|4|0|3

return to listing

Inconel 713LC

    SSC    (N):    laser powder bed fusion : tested at 23 °C (73 °F), 8.3 x 10⁻⁴/s, as-built, energy density of 0.157 J/mm : 10256|4|0|0
    SSC    (N):    laser powder bed fusion : tested at 23 °C (73 °F), 8.3 x 10⁻⁴/s, as-built, energy density of 0.176 J/mm : 10256|4|0|1
    SSC    (N):    laser powder bed fusion : tested at 23 °C (73 °F), 8.3 x 10⁻⁴/s, solution treated at 1175 °C (2147 °F), energy density of 0.157 J/mm : 10256|4|0|2

return to listing

Inconel 718

    SSC    (N):    laser powder bed fusion, Georgilas et. al. : tested at 650 °C (1202 °F), horizontal, as-built, unknown strain rate : 1868|4|9|0
    SSC    (N):    laser powder bed fusion, Georgilas et. al. : tested at 650 °C (1202 °F), horizontal, 980 °C (1796 °F) + aging, unknown strain rate : 1868|4|9|1
    SSC    (N):    laser powder bed fusion, Georgilas et. al. : tested at 650 °C (1202 °F), horizontal, 1200 °C (2192 °F) + aging, unknown strain rate : 1868|4|9|2
    SSC    (N):    laser powder bed fusion, Georgilas et. al. : tested at 650 °C (1202 °F), horizontal, HIPed + aging, unknown strain rate : 1868|4|9|3
    SSC    (N):    wire + arc additive manufacturing (WAAM), Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, as-deposited, vertical : 1868|4|10|0
    SSC    (N):    wire + arc additive manufacturing (WAAM), Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, as-deposited, horizontal : 1868|4|10|1
    SSC    (N):    wire + arc additive manufacturing (WAAM), Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, AMS heat-treated, vertical : 1868|4|10|2
    SSC    (N):    wire + arc additive manufacturing (WAAM), Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, AMS heat-treated, horizontal : 1868|4|10|3
    SSC    (N):    wire + arc additive manufacturing (WAAM), Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, API heat-treated, vertical : 1868|4|10|4
    SSC    (N):    wire + arc additive manufacturing (WAAM), Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, API heat-treated, horizontal : 1868|4|10|5
    SSC    (N):    3 mm (0.118 inch) thick sheet, Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, solution annealed : 1868|4|11|0
    SSC    (N):    3 mm (0.118 inch) thick sheet, Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, AMS heat-treated : 1868|4|11|1
    SSC    (N):    3 mm (0.118 inch) thick sheet, Kindermann et. al. : tested at 20 °C (68 °F), 5.2 x 10⁻⁴/s, API heat-treated : 1868|4|11|2

return to listing

Inconel HX / Hastelloy X / Nimonic PE13

    SSC    (N):    laser powder bed fusion : tested at 700 °C (1292 °F), 0.001/s, as-built, vertical, He et. al. : 1873|4|1|0
    SSC    (N):    laser powder bed fusion : tested at 700 °C (1292 °F), 0.001/s, as-built, horizontal, He et. al. : 1873|4|1|1
    SSC    (N):    laser powder bed fusion : tested at 815 °C (1499 °F), 2.8 x 10⁻⁶/s, HIPed, Wu et. al. : 1873|4|1|2
    SSC    (N):    laser powder bed fusion : tested at 815 °C (1499 °F), 2.8 x 10⁻⁶/s, HIPed + 1230 °C (2246 °F) for 2 h, Wu et. al. : 1873|4|1|3

return to listing

LaCa₄O(BO₃)₃ (New)

    DLL       :    solid : 11 direction : 15110|0|0|0
    DLL       :    solid : 22 direction : 15110|0|0|1
    DLL       :    solid : 33 direction : 15110|0|0|2
    DLL       :    solid : 13 direction : 15110|0|0|3
    DLL       :    solid : polycrystal : 15110|0|0|4
    MTE       :    solid : 11 direction : 15110|8|0|0
    MTE       :    solid : 22 direction : 15110|8|0|1
    MTE       :    solid : 33 direction : 15110|8|0|2
    MTE       :    solid : 13 direction : 15110|8|0|3
    MTE       :    solid : polycrystal : 15110|8|0|4
    SH        :    solid : 15110|9|0|-1
    CTE       :    solid : 11 direction : 15110|16|0|0
    CTE       :    solid : 22 direction : 15110|16|0|1
    CTE       :    solid : 33 direction : 15110|16|0|2
    CTE       :    solid : 13 direction : 15110|16|0|3
    CTE       :    solid : polycrystal : 15110|16|0|4
    HC        :    solid : 15110|17|0|-1

return to listing

M2

    UTS   (N*):    hardness HRC 30 : 2871|5|0|-1
    UTS   (N*):    hardness HRC 38 : 2871|5|1|-1
    UTS   (N*):    hardness HRC 52 : 2871|5|2|-1
    YS    (N*):    hardness HRC 30 : 0.2% offset : 2871|13|0|0
    YS    (N*):    hardness HRC 30 : 0.02% offset : 2871|13|0|1
    YS    (N*):    hardness HRC 38 : 0.2% offset : 2871|13|1|0
    YS    (N*):    hardness HRC 38 : 0.02% offset : 2871|13|1|1
    YS    (N*):    hardness HRC 52 : 0.2% offset : 2871|13|2|0
    YS    (N*):    hardness HRC 52 : 0.02% offset : 2871|13|2|1
    YSC   (N*):    hardness HRC 65 : 0.2% offset : 2871|21|1|0
    YSC   (N*):    hardness HRC 65 : 0.02% offset : 2871|21|1|1
    UCS   (N*):    hardness HRC 65 : 2871|47|0|-1

return to listing

M42

    SSCC   (N):    as-cast, high nitrogen, 0.01/s : tested at 1000 °C (1832 °F) : 2876|12|0|0
    SSCC   (N):    as-cast, high nitrogen, 0.01/s : tested at 1050 °C (1922 °F) : 2876|12|0|1
    SSCC   (N):    as-cast, high nitrogen, 0.01/s : tested at 1100 °C (2012 °F) : 2876|12|0|2
    SSCC   (N):    as-cast, high nitrogen, 0.01/s : tested at 1150 °C (2102 °F) : 2876|12|0|3
    SSCC   (N):    as-cast, high nitrogen, 0.1/s : tested at 1000 °C (1832 °F) : 2876|12|1|0
    SSCC   (N):    as-cast, high nitrogen, 0.1/s : tested at 1050 °C (1922 °F) : 2876|12|1|1
    SSCC   (N):    as-cast, high nitrogen, 0.1/s : tested at 1100 °C (2012 °F) : 2876|12|1|2
    SSCC   (N):    as-cast, high nitrogen, 0.1/s : tested at 1150 °C (2102 °F) : 2876|12|1|3
    SSCC   (N):    as-cast, high nitrogen, 1/s : tested at 1000 °C (1832 °F) : 2876|12|2|0
    SSCC   (N):    as-cast, high nitrogen, 1/s : tested at 1050 °C (1922 °F) : 2876|12|2|1
    SSCC   (N):    as-cast, high nitrogen, 1/s : tested at 1100 °C (2012 °F) : 2876|12|2|2
    SSCC   (N):    as-cast, high nitrogen, 1/s : tested at 1150 °C (2102 °F) : 2876|12|2|3
    SSCC   (N):    as-cast, high nitrogen, 10/s : tested at 1000 °C (1832 °F) : 2876|12|3|0
    SSCC   (N):    as-cast, high nitrogen, 10/s : tested at 1050 °C (1922 °F) : 2876|12|3|1
    SSCC   (N):    as-cast, high nitrogen, 10/s : tested at 1100 °C (2012 °F) : 2876|12|3|2
    SSCC   (N):    as-cast, high nitrogen, 10/s : tested at 1150 °C (2102 °F) : 2876|12|3|3
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.01/s : tested at 1000 °C (1832 °F) : 2876|12|4|0
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.01/s : tested at 1050 °C (1922 °F) : 2876|12|4|1
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.01/s : tested at 1100 °C (2012 °F) : 2876|12|4|2
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.01/s : tested at 1150 °C (2102 °F) : 2876|12|4|3
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.1/s : tested at 1000 °C (1832 °F) : 2876|12|5|0
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.1/s : tested at 1050 °C (1922 °F) : 2876|12|5|1
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.1/s : tested at 1100 °C (2012 °F) : 2876|12|5|2
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 0.1/s : tested at 1150 °C (2102 °F) : 2876|12|5|3
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 1/s : tested at 1000 °C (1832 °F) : 2876|12|6|0
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 1/s : tested at 1050 °C (1922 °F) : 2876|12|6|1
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 1/s : tested at 1100 °C (2012 °F) : 2876|12|6|2
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 1/s : tested at 1150 °C (2102 °F) : 2876|12|6|3
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 10/s : tested at 1000 °C (1832 °F) : 2876|12|7|0
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 10/s : tested at 1050 °C (1922 °F) : 2876|12|7|1
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 10/s : tested at 1100 °C (2012 °F) : 2876|12|7|2
    SSCC   (N):    cast, annealed at 1100 °C (2012 °F) for 8 h, high nitrogen, 10/s : tested at 1150 °C (2102 °F) : 2876|12|7|3

return to listing

Marlock C1650 (New)

    TC        :    solid : 15114|1|0|-1
    E     (*):    solid : 15114|3|0|-1
    UTS       :    solid : 15114|5|0|-1
    YS        :    solid : 15114|13|0|-1
    D     (*):    solid : 15114|24|0|-1
    %El       :    solid : 15114|29|0|-1

return to listing

Mg₉₆_.₇₅Zn₀_.₈₅Y₂_.₀₅Al₀_.₃₅ (New)

    SSC       :    rapidly solidified ribbon-consolidated : tested at 20 °C (68 °F), 5 x 10⁻⁴/s, as-quenched : 15096|4|0|0
    SSC       :    rapidly solidified ribbon-consolidated : tested at 20 °C (68 °F), 5 x 10⁻⁴/s, 10 h at 460 °C (860 °F) : 15096|4|0|1
    SSC       :    rapidly solidified ribbon-consolidated : tested at 20 °C (68 °F), 5 x 10⁻⁴/s, 24 h at 460 °C (860 °F) : 15096|4|0|2
    SSC       :    rapidly solidified ribbon-consolidated : tested at 20 °C (68 °F), 5 x 10⁻⁴/s, 48 h at 460 °C (860 °F) : 15096|4|0|3
    UTS   (*):    effect of pre-extrusion anneal : as-quenched : 15096|5|0|0
    UTS   (*):    effect of pre-extrusion anneal : 10 h at 460 °C (860 °F) : 15096|5|0|1
    UTS   (*):    effect of pre-extrusion anneal : 24 h at 460 °C (860 °F) : 15096|5|0|2
    UTS   (*):    effect of pre-extrusion anneal : 48 h at 460 °C (860 °F) : 15096|5|0|3
    YS    (*):    effect of pre-extrusion anneal : as-quenched : 15096|13|0|0
    YS    (*):    effect of pre-extrusion anneal : 10 h at 460 °C (860 °F) : 15096|13|0|1
    YS    (*):    effect of pre-extrusion anneal : 24 h at 460 °C (860 °F) : 15096|13|0|2
    YS    (*):    effect of pre-extrusion anneal : 48 h at 460 °C (860 °F) : 15096|13|0|3
    %El   (*):    effect of pre-extrusion anneal : as-quenched : 15096|29|0|0
    %El   (*):    effect of pre-extrusion anneal : 10 h at 460 °C (860 °F) : 15096|29|0|1
    %El   (*):    effect of pre-extrusion anneal : 24 h at 460 °C (860 °F) : 15096|29|0|2
    %El   (*):    effect of pre-extrusion anneal : 48 h at 460 °C (860 °F) : 15096|29|0|3

return to listing

Ni₂₁Fe₂₅Co₂₃Cr₂₉Mo₂ (New)

    SSC       :    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : tested at 20 °C (68 °F), 0.001/s : 15074|4|0|0
    SSC       :    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : tested at 20 °C (68 °F), 0.001/s : 15074|4|1|0
    UTS   (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|5|0|-1
    UTS   (*):    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|5|1|-1
    YS    (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|13|0|-1
    YS    (*):    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|13|1|-1
    %El   (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|29|0|-1
    %El   (*):    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|29|1|-1
    UCS       :    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|47|0|-1
    UCS       :    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15074|47|1|-1

return to listing

Ni₂₅Fe₂₇Co₂₆Cr₂₁Mo₂ (New)

    SSC       :    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : tested at 20 °C (68 °F), 0.001/s : 15073|4|0|0
    SSC       :    SPS sintered at 1250 °C (2282 °F), annealed 24 h at 1200 °C (2192 °F) : tested at 20 °C (68 °F), 0.001/s : 15073|4|1|0
    UTS   (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|5|0|-1
    UTS   (*):    SPS sintered at 1250 °C (2282 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|5|1|-1
    YS    (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|13|0|-1
    YS    (*):    SPS sintered at 1250 °C (2282 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|13|1|-1
    %El   (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|29|0|-1
    %El   (*):    SPS sintered at 1250 °C (2282 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|29|1|-1
    UCS       :    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|47|0|-1
    UCS       :    SPS sintered at 1250 °C (2282 °F), annealed 24 h at 1200 °C (2192 °F) : 15073|47|1|-1

return to listing

Ni₂₅Fe₂₈Co₂₉Cr₁₇Mo (New)

    SSC       :    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : tested at 20 °C (68 °F), 0.001/s : 15075|4|0|0
    SSC       :    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : tested at 20 °C (68 °F), 0.001/s : 15075|4|1|0
    UTS   (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|5|0|-1
    UTS   (*):    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|5|1|-1
    YS    (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|13|0|-1
    YS    (*):    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|13|1|-1
    %El   (*):    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|29|0|-1
    %El   (*):    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|29|1|-1
    UCS       :    SPS sintered at 1000 °C (1832 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|47|0|-1
    UCS       :    SPS sintered at 1100 °C (2012 °F), annealed 24 h at 1200 °C (2192 °F) : 15075|47|1|-1

return to listing

Ni-Ti (Nitinol)

    SSC    (N):    electron beam powder bed fusion : tested at 20 °C (68 °F), as-built, perpendicular to build direction, 3 x 10⁻⁴/s : 2851|4|0|0

return to listing

PBT (New)

    RHO       :    solid : DC field, 1 minute after voltage applied : 15095|2|0|0
    RHO       :    solid : DC field, 10 minutes after voltage applied : 15095|2|0|1
    RHO       :    solid : DC field, 60 minutes after voltage applied : 15095|2|0|2
    SIGMA    :    solid : DC field, 1 minute after voltage applied : 15095|10|0|0
    SIGMA    :    solid : DC field, 10 minutes after voltage applied : 15095|10|0|1
    SIGMA    :    solid : DC field, 60 minutes after voltage applied : 15095|10|0|2
    DCRPT    :    medium frequency, AC : tested at -100 °C (-148 °F) : 15095|41|0|0
    DCRPT    :    medium frequency, AC : tested at -75 °C (-103 °F) : 15095|41|0|1
    DCRPT    :    medium frequency, AC : tested at -50 °C (-58 °F) : 15095|41|0|2
    DCRPT    :    medium frequency, AC : tested at -25 °C (-13 °F) : 15095|41|0|3
    DCRPT    :    medium frequency, AC : tested at 0 °C (32 °F) : 15095|41|0|4
    DCRPT    :    medium frequency, AC : tested at 25 °C (77 °F) : 15095|41|0|5
    DCRPT    :    medium frequency, AC : tested at 50 °C (122 °F) : 15095|41|0|6
    DCRPT    :    medium frequency, AC : tested at 66 °C (151 °F) : 15095|41|0|7
    DCRPT    :    medium frequency, AC : tested at 80 °C (176 °F) : 15095|41|0|8
    DCRPT    :    medium frequency, AC : tested at 92 °C (198 °F) : 15095|41|0|9
    DCRPT    :    medium frequency, AC : tested at 105 °C (221 °F) : 15095|41|0|10
    DF        :    ultra-low frequency, DC : tested at 66 °C (151 °F) : 15095|42|0|0
    DF        :    ultra-low frequency, DC : tested at 80 °C (176 °F) : 15095|42|0|1
    DF        :    ultra-low frequency, DC : tested at 92 °C (198 °F) : 15095|42|0|2
    DF        :    ultra-low frequency, DC : tested at 105 °C (221 °F) : 15095|42|0|3
    DF        :    ultra-low frequency, DC : tested at 118 °C (244 °F) : 15095|42|0|4
    DF        :    medium frequency, AC : tested at -100 °C (-148 °F) : 15095|42|1|0
    DF        :    medium frequency, AC : tested at -75 °C (-103 °F) : 15095|42|1|1
    DF        :    medium frequency, AC : tested at -50 °C (-58 °F) : 15095|42|1|2
    DF        :    medium frequency, AC : tested at -25 °C (-13 °F) : 15095|42|1|3
    DF        :    medium frequency, AC : tested at 0 °C (32 °F) : 15095|42|1|4
    DF        :    medium frequency, AC : tested at 25 °C (77 °F) : 15095|42|1|5
    DF        :    medium frequency, AC : tested at 50 °C (122 °F) : 15095|42|1|6
    DF        :    medium frequency, AC : tested at 66 °C (151 °F) : 15095|42|1|7
    DF        :    medium frequency, AC : tested at 80 °C (176 °F) : 15095|42|1|8
    DF        :    medium frequency, AC : tested at 105 °C (221 °F) : 15095|42|1|9
    DF        :    medium frequency, AC : tested at 130 °C (266 °F) : 15095|42|1|10
    DF        :    effect of moisture : tested at 25 °C (77 °F), 0 wt% moisture : 15095|42|2|0
    DF        :    effect of moisture : tested at 25 °C (77 °F), 0.13 wt% moisture : 15095|42|2|1
    DF        :    effect of moisture : tested at 25 °C (77 °F), 0.46 wt% moisture : 15095|42|2|2

return to listing

QP 1180 (New)

    SSC       :    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 25 °C (77 °F), 2 x 10⁻⁴/s : 15071|4|0|0
    SSC       :    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 100 °C (212 °F), 2 x 10⁻⁴/s : 15071|4|0|1
    SSC       :    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 175 °C (347 °F), 2 x 10⁻⁴/s : 15071|4|0|2
    SSC       :    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 250 °C (482 °F), 2 x 10⁻⁴/s : 15071|4|0|3

return to listing

QP 980 (3GAHSS)

    SSC    (N):    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 25 °C (77 °F), 2 x 10⁻⁴/s : 9447|4|0|0
    SSC    (N):    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 100 °C (212 °F), 2 x 10⁻⁴/s : 9447|4|0|1
    SSC    (N):    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 175 °C (347 °F), 2 x 10⁻⁴/s : 9447|4|0|2
    SSC    (N):    1 mm (0.0394 inch) thick, hot-dip galvannealed sheet : tested at 250 °C (482 °F), 2 x 10⁻⁴/s : 9447|4|0|3

return to listing

RR2450 (New)

    E     (*):    HIPed : in compression : 15113|3|0|0
    SSCC      :    HIPed : tested at 20 °C (68 °F), 1 x 10⁻⁴/s : 15113|12|0|0
    YSC   (*):    HIPed : 15113|21|0|-1

return to listing

S700 (New)

    FSN       :    weld : tested at 20 °C (68 °F), R = 0.1, axial, as-weld, stress range : 15115|6|0|0
    FSN       :    weld : tested at 20 °C (68 °F), R = 0.1, axial, HFMI treated, stress range : 15115|6|0|1
    FSN       :    weld : tested at 20 °C (68 °F), R = 0.5, axial, HFMI treated, stress range : 15115|6|0|2

return to listing

SiMo1000 ductile iron (3.5 C - 3 Al - 2.6 Si - 1 Mo)

    TC     (N):    solid : 10310|1|0|-1
    UTS    (N):    solid : 10310|5|0|-1
    FSN    (N):    as-cast, low nodularity : tested at 800 °C (1472 °F), R = -1, axial, in diesel exhaust, maximum stress : 10310|6|0|0
    FSN    (N):    as-cast, high nodularity : tested at 800 °C (1472 °F), R = -1, axial, in diesel exhaust, maximum stress : 10310|6|1|0
    FEN    (N):    as-cast, low nodularity : tested at 800 °C (1472 °F), R = -1, axial, in Ar, total strain amplitude : 10310|14|0|0
    FEN    (N):    as-cast, low nodularity : tested at 800 °C (1472 °F), R = -1, axial, in diesel exhaust, total strain amplitude : 10310|14|0|1
    FEN    (N):    as-cast, high nodularity : tested at 800 °C (1472 °F), R = -1, axial, in Ar, total strain amplitude : 10310|14|1|0
    FEN    (N):    as-cast, high nodularity : tested at 800 °C (1472 °F), R = -1, axial, in diesel exhaust, total strain amplitude : 10310|14|1|1

return to listing

SiMo51 ductile iron (3.2 C - 4.5 Si - 1 Mo)

    TC     (N):    solid : 10309|1|0|-1
    UTS    (N):    solid : 10309|5|0|-1
    FSN    (N):    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, maximum stress : 10309|6|0|0
    FEN    (N):    thermo-mechanical fatigue : tested at 100 °C (212 °F) to 500 °C (932 °F), axial, out-of-phase, total strain amplitude : 10309|14|0|0
    FEN    (N):    as-cast : tested at 800 °C (1472 °F), R = -1, axial, in Ar, total strain amplitude : 10309|14|1|0
    FEN    (N):    as-cast : tested at 800 °C (1472 °F), R = -1, axial, in diesel exhaust, total strain amplitude : 10309|14|1|1

return to listing

SUPREMAX 217XG (New)

    DLL       :    solid : 15085|0|0|-1
    TC    (*):    solid : 15085|1|0|-1
    E     (*):    solid : 15085|3|0|-1
    UTS   (*):    solid : 15085|5|0|-1
    MTE       :    solid : 15085|8|0|-1
    SH    (*):    solid : 15085|9|0|-1
    G     (*):    solid : 15085|11|0|-1
    SSCC      :    1000/s : tested at 25 °C (77 °F) : 15085|12|0|0
    SSCC      :    1000/s : tested at 100 °C (212 °F) : 15085|12|0|1
    SSCC      :    1000/s : tested at 200 °C (392 °F) : 15085|12|0|2
    SSCC      :    2000/s : tested at 25 °C (77 °F) : 15085|12|1|0
    SSCC      :    2000/s : tested at 100 °C (212 °F) : 15085|12|1|1
    SSCC      :    2000/s : tested at 200 °C (392 °F) : 15085|12|1|2
    SSCC      :    3000/s : tested at 25 °C (77 °F) : 15085|12|2|0
    SSCC      :    3000/s : tested at 100 °C (212 °F) : 15085|12|2|1
    SSCC      :    3000/s : tested at 200 °C (392 °F) : 15085|12|2|2
    YS    (*):    solid : 15085|13|0|-1
    CTE       :    solid : 15085|16|0|-1
    v     (*):    solid : 15085|19|0|-1
    D         :    solid : 15085|24|0|-1
    TD    (*):    solid : 15085|25|0|-1
    K     (*):    solid : 15085|27|0|-1

return to listing

SUPREMAX 225XE (New)

    DLL       :    solid : 15086|0|0|-1
    TC    (*):    solid : 15086|1|0|-1
    E     (*):    solid : 15086|3|0|-1
    UTS   (*):    solid : 15086|5|0|-1
    MTE       :    solid : 15086|8|0|-1
    SH    (*):    solid : 15086|9|0|-1
    G     (*):    solid : 15086|11|0|-1
    SSCC      :    1000/s : tested at 25 °C (77 °F) : 15086|12|0|0
    SSCC      :    1000/s : tested at 100 °C (212 °F) : 15086|12|0|1
    SSCC      :    1000/s : tested at 200 °C (392 °F) : 15086|12|0|2
    SSCC      :    2000/s : tested at 25 °C (77 °F) : 15086|12|1|0
    SSCC      :    2000/s : tested at 100 °C (212 °F) : 15086|12|1|1
    SSCC      :    2000/s : tested at 200 °C (392 °F) : 15086|12|1|2
    SSCC      :    3000/s : tested at 25 °C (77 °F) : 15086|12|2|0
    SSCC      :    3000/s : tested at 100 °C (212 °F) : 15086|12|2|1
    SSCC      :    3000/s : tested at 200 °C (392 °F) : 15086|12|2|2
    YS    (*):    solid : 15086|13|0|-1
    CTE       :    solid : 15086|16|0|-1
    v     (*):    solid : 15086|19|0|-1
    D         :    solid : 15086|24|0|-1
    TD    (*):    solid : 15086|25|0|-1
    K     (*):    solid : 15086|27|0|-1

return to listing

SUPREMAX 225XF (New)

    DLL       :    solid : 15087|0|0|-1
    TC    (*):    solid : 15087|1|0|-1
    E     (*):    solid : 15087|3|0|-1
    UTS   (*):    solid : 15087|5|0|-1
    MTE       :    solid : 15087|8|0|-1
    SH    (*):    solid : 15087|9|0|-1
    G     (*):    solid : 15087|11|0|-1
    SSCC      :    1000/s : tested at 25 °C (77 °F) : 15087|12|0|0
    SSCC      :    1000/s : tested at 100 °C (212 °F) : 15087|12|0|1
    SSCC      :    1000/s : tested at 200 °C (392 °F) : 15087|12|0|2
    SSCC      :    2000/s : tested at 25 °C (77 °F) : 15087|12|1|0
    SSCC      :    2000/s : tested at 100 °C (212 °F) : 15087|12|1|1
    SSCC      :    2000/s : tested at 200 °C (392 °F) : 15087|12|1|2
    SSCC      :    3000/s : tested at 25 °C (77 °F) : 15087|12|2|0
    SSCC      :    3000/s : tested at 100 °C (212 °F) : 15087|12|2|1
    SSCC      :    3000/s : tested at 200 °C (392 °F) : 15087|12|2|2
    YS    (*):    solid : 15087|13|0|-1
    CTE       :    solid : 15087|16|0|-1
    v     (*):    solid : 15087|19|0|-1
    D         :    solid : 15087|24|0|-1
    TD    (*):    solid : 15087|25|0|-1
    K     (*):    solid : 15087|27|0|-1

return to listing

Ti - 6 Al - 4 V (Grade 5)

    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, unmarked (reference), stress amplitude : 8958|6|1|0
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #1), stress amplitude : 8958|6|1|1
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #2), stress amplitude : 8958|6|1|2
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #3), stress amplitude : 8958|6|1|3
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #4), stress amplitude : 8958|6|1|4

return to listing

Ti - 6 Al - 4 V

    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 910 °C (1670 °F) STA, unknown strain rate, vertical, Cao et. al. : 2836|4|4|2
    SSC    (N):    laser powder bed fusion : tested at 20 °C (68 °F), 950 °C (1742 °F) STA, unknown strain rate, vertical, Cao et. al. : 2836|4|4|3
    SSC    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), oscillation build, horizontal, 6.2 x 10⁻⁴/s, Syed et. al. : 2836|4|5|0
    SSC    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), oscillation build, vertical, 6.2 x 10⁻⁴/s, Syed et. al. : 2836|4|5|1
    SSC    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), parallel build, horizontal, 6.2 x 10⁻⁴/s, Syed et. al. : 2836|4|5|2
    SSC    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), parallel build, vertical, 6.2 x 10⁻⁴/s, Syed et. al. : 2836|4|5|3
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, 4-pt bending, maximum stress, Aguado-Montero et. al. : 2836|6|4|6
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, 4-pt bending, shot peened, maximum stress, Aguado-Montero et. al. : 2836|6|4|7
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, 4-pt bending, shot peened + CASE, maximum stress, Aguado-Montero et. al. : 2836|6|4|8
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, 4-pt bending, laser peened, maximum stress, Aguado-Montero et. al. : 2836|6|4|9
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, as-build, maximum stress, Kahlin et. al. : 2836|6|4|10
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, shot peened, maximum stress, Kahlin et. al. : 2836|6|4|11
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, centrifugal finished, maximum stress, Kahlin et. al. : 2836|6|4|12
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, linished surface, maximum stress, Kahlin et. al. : 2836|6|4|13
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, laser polished, maximum stress, Kahlin et. al. : 2836|6|4|14
    FSN    (N):    laser powder bed fusion : tested at 23 °C (73 °F), R = 0.1, laser shot peened, maximum stress, Kahlin et. al. : 2836|6|4|15
    FSN    (N):    electron beam powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, HIPed, as-built, maximum stress, Ednie et. al. : 2836|6|5|1
    FSN    (N):    electron beam powder bed fusion : tested at 20 °C (68 °F), R = 0.1, axial, HIPed, polished, maximum stress, Ednie et. al. : 2836|6|5|2
    FSN    (N):    electron beam powder bed fusion : tested at 23 °C (73 °F), R = 0.1, as-build, maximum stress, Kahlin et. al. : 2836|6|5|3
    FSN    (N):    electron beam powder bed fusion : tested at 23 °C (73 °F), R = 0.1, shot peened, maximum stress, Kahlin et. al. : 2836|6|5|4
    FSN    (N):    electron beam powder bed fusion : tested at 23 °C (73 °F), R = 0.1, centrifugal finished, maximum stress, Kahlin et. al. : 2836|6|5|5
    FSN    (N):    electron beam powder bed fusion : tested at 23 °C (73 °F), R = 0.1, linished surface, maximum stress, Kahlin et. al. : 2836|6|5|6
    FSN    (N):    electron beam powder bed fusion : tested at 23 °C (73 °F), R = 0.1, laser polished, maximum stress, Kahlin et. al. : 2836|6|5|7
    FSN    (N):    electron beam powder bed fusion : tested at 23 °C (73 °F), R = 0.1, laser shot peened, maximum stress, Kahlin et. al. : 2836|6|5|8
    FSN    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), R = 0.1, axial, oscillation build, horizontal, maximum stress, Syed et. al. : 2836|6|6|0
    FSN    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), R = 0.1, axial, oscillation build, vertical, maximum stress, Syed et. al. : 2836|6|6|1
    FSN    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), R = 0.1, axial, parallel build, horizontal, maximum stress, Syed et. al. : 2836|6|6|2
    FSN    (N):    wire + arc additive manufactured : tested at 20 °C (68 °F), R = 0.1, axial, parallel build, vertical, maximum stress, Syed et. al. : 2836|6|6|3

return to listing

Ti Grade 4

    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, unmarked (reference), stress amplitude : 2834|6|3|0
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #1), stress amplitude : 2834|6|3|1
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #2), stress amplitude : 2834|6|3|2
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #3), stress amplitude : 2834|6|3|3
    FSN    (N):    effect of laser marking, dental implant : tested at 25 °C (77 °F), R = 0.07 to 0.33, marked (settings #4), stress amplitude : 2834|6|3|4

return to listing

Ti-150A (Ti - 3 Cr - 2 Fe)

    DLL    (R):    solid : 3403|0|0|-1
    MTE    (R):    solid : 3403|8|0|-1
    CTE    (R):    solid : 3403|16|0|-1
    D      (R):    solid : 3403|24|0|-1

return to listing

Ti60 (New)

    E     (*):    solid : 15120|3|0|-1
    SSC       :    wrought : tested at 20 °C (68 °F), lamellar, unknown strain rate : 15120|4|0|0
    SSC       :    wrought : tested at 20 °C (68 °F), bimodal, unknown strain rate : 15120|4|0|1
    SSC       :    wrought : tested at 600 °C (1112 °F), lamellar, unknown strain rate : 15120|4|0|2
    SSC       :    wrought : tested at 600 °C (1112 °F), bimodal, unknown strain rate : 15120|4|0|3
    SSC       :    electron beam directed energy deposition : tested at 20 °C (68 °F), as-built, horizontal, unknown strain rate : 15120|4|1|0
    SSC       :    electron beam directed energy deposition : tested at 20 °C (68 °F), as-built, vertical, unknown strain rate : 15120|4|1|1
    SSC       :    electron beam directed energy deposition : tested at 20 °C (68 °F), STA, horizontal, unknown strain rate : 15120|4|1|2
    SSC       :    electron beam directed energy deposition : tested at 20 °C (68 °F), STA, vertical, unknown strain rate : 15120|4|1|3
    SSC       :    electron beam directed energy deposition : tested at 600 °C (1112 °F), as-built, horizontal, unknown strain rate : 15120|4|1|4
    SSC       :    electron beam directed energy deposition : tested at 600 °C (1112 °F), as-built, vertical, unknown strain rate : 15120|4|1|5
    SSC       :    electron beam directed energy deposition : tested at 600 °C (1112 °F), STA, horizontal, unknown strain rate : 15120|4|1|6
    SSC       :    electron beam directed energy deposition : tested at 600 °C (1112 °F), STA, vertical, unknown strain rate : 15120|4|1|7
    FSN       :    forged and heat treated : tested at 450 °C (842 °F), R = -1, ultrasonic, surface failure, maximum stress : 15120|6|0|0
    FSN       :    forged and heat treated : tested at 450 °C (842 °F), R = -1, ultrasonic, subsurface failure, maximum stress : 15120|6|0|1
    FSN       :    forged and heat treated : tested at 450 °C (842 °F), R = -1, ultrasonic, surface & subsurface failure, maximum stress : 15120|6|0|2
    FSN       :    forged and heat treated : tested at 450 °C (842 °F), R = -1, ultrasonic, surface failure, pre-strained, maximum stress : 15120|6|0|3
    FSN       :    forged and heat treated : tested at 450 °C (842 °F), R = -1, ultrasonic, subsurface failure, pre-strained, maximum stress : 15120|6|0|4
    FSN       :    forged and heat treated : tested at 450 °C (842 °F), R = -1, ultrasonic, surface & subsurface failure, pre-strained, maximum stress : 15120|6|0|5
    D     (*):    solid : 15120|24|0|-1

return to listing

Timetal 834

    DLL    (R):    forgings & bars : aged at 700 °C (1292 °F) for 2 h : 2850|0|0|0
    TC    (N*):    solid : 2850|1|0|-1
    E     (N*):    solid : 2850|3|0|-1
    MTE    (R):    forgings & bars : aged at 700 °C (1292 °F) for 2 h : 2850|8|0|0
    CTE    (R):    forgings & bars : aged at 700 °C (1292 °F) for 2 h : 2850|16|0|0
    D      (R):    forgings & bars : aged at 700 °C (1292 °F) for 2 h : 2850|24|0|0

return to listing

TiZrNbHfTa (New)

    YS        :    as-cast : bcc phase : 15078|13|0|0

return to listing

TiZrNbV (New)

    SSCC      :    vacuum arc-melted : tested at 20 °C (68 °F), 0.007/s : 15097|12|0|0
    SSCC      :    vacuum arc-melted : tested at 20 °C (68 °F), 3423/s : 15097|12|0|1
    SSCC      :    vacuum arc-melted : tested at 20 °C (68 °F), 4817/s : 15097|12|0|2
    SSCC      :    vacuum arc-melted : tested at 20 °C (68 °F), 8103/s : 15097|12|0|3
    SSCC      :    vacuum arc-melted : tested at 20 °C (68 °F), 10373/s : 15097|12|0|4
    YSC   (*):    solid : 0.007/s : 15097|21|0|0
    YSC   (*):    solid : 3423/s : 15097|21|0|1
    YSC   (*):    solid : 4817/s : 15097|21|0|2
    YSC   (*):    solid : 8103/s : 15097|21|0|3
    YSC   (*):    solid : 10373/s : 15097|21|0|4
    D     (*):    solid : 15097|24|0|-1

return to listing

TRIP 700

    SSC    (N):    as-received, 800/s : tested at 20 °C (68 °F) : 1131|4|2|0

return to listing

TWIP steel 8 Mn - 0.8 Al - 0.1 C (New)

    SSC       :    hot-rolled & annealed : tested at 20 °C (68 °F), 2.5 x 10⁻⁴/s : 15102|4|0|0
    SSC       :    hot-rolled & annealed : tested at 500 °C (932 °F), 1/s : 15102|4|0|1
    SSC       :    cold-rolled : tested at 20 °C (68 °F), 2.5 x 10⁻⁴/s : 15102|4|1|0
    SSC       :    cold-rolled : tested at 500 °C (932 °F), 1/s : 15102|4|1|1
    SSC       :    cold-rolled & annealed : tested at 20 °C (68 °F), 2.5 x 10⁻⁴/s : 15102|4|2|0
    SSC       :    cold-rolled & annealed : tested at 500 °C (932 °F), 1/s : 15102|4|2|1

return to listing

TWIP steel 8 Mn - 2.3 Al - 1.3 Si - 0.4 C (New)

    SSC       :    water quenched & annealed : tested at 20 °C (68 °F), 0.001/s, annealed 10 minutes at 660 °C (1220 °F) : 14589|4|0|0
    SSC       :    water quenched & annealed : tested at 20 °C (68 °F), 0.001/s, annealed 30 minutes at 660 °C (1220 °F) : 14589|4|0|1
    SSC       :    water quenched & annealed : tested at 20 °C (68 °F), 0.001/s, annealed 2 h at 660 °C (1220 °F) : 14589|4|0|2
    SSC       :    water quenched & annealed : tested at 20 °C (68 °F), 0.001/s, annealed 4 h at 660 °C (1220 °F) : 14589|4|0|3
    SSC       :    water quenched & annealed : tested at 20 °C (68 °F), 0.001/s, annealed 24 h at 660 °C (1220 °F) : 14589|4|0|4

return to listing

UNS C11000 (ETP)

    SSC    (N):    cold-drawn, annealed : tested at 20 °C (68 °F), 1 x 10⁻⁴/s : 741|4|3|0
    SSC    (N):    cold-drawn, annealed : tested at 20 °C (68 °F), 0.001/s : 741|4|3|1
    SSC    (N):    cold-drawn, annealed : tested at 20 °C (68 °F), 0.01/s : 741|4|3|2

return to listing

UNS S29108

    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 0% cold worked : 11722|5|0|0
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 10% cold worked : 11722|5|0|1
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 20% cold worked : 11722|5|0|2
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 30% cold worked : 11722|5|0|3
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 40% cold worked : 11722|5|0|4
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 50% cold worked : 11722|5|0|5
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 60% cold worked : 11722|5|0|6
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 70% cold worked : 11722|5|0|7
    UTS   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 80% cold worked : 11722|5|0|8
    UTS   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 0% cold worked : 11722|5|1|0
    UTS   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 10% cold worked : 11722|5|1|1
    UTS   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 20% cold worked : 11722|5|1|2
    UTS   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 30% cold worked : 11722|5|1|3
    UTS   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 40% cold worked : 11722|5|1|4
    UTS   (N*):    effect of forging temperature on RT properties : forged at 1204 °C (2200 °F), water quenched : 11722|5|2|0
    UTS   (N*):    effect of forging temperature on RT properties : forged at 1149 °C (2100 °F), water quenched : 11722|5|2|1
    UTS   (N*):    effect of forging temperature on RT properties : forged at 1093 °C (2000 °F), water quenched : 11722|5|2|2
    UTS   (N*):    effect of forging temperature on RT properties : forged at 1038 °C (1900 °F), water quenched : 11722|5|2|3
    UTS   (N*):    effect of forging temperature on RT properties : forged at 982 °C (1800 °F), water quenched : 11722|5|2|4
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 0% cold worked : 11722|13|0|0
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 10% cold worked : 11722|13|0|1
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 20% cold worked : 11722|13|0|2
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 30% cold worked : 11722|13|0|3
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 40% cold worked : 11722|13|0|4
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 50% cold worked : 11722|13|0|5
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 60% cold worked : 11722|13|0|6
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 70% cold worked : 11722|13|0|7
    YS    (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 80% cold worked : 11722|13|0|8
    YS    (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 0% cold worked : 11722|13|1|0
    YS    (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 10% cold worked : 11722|13|1|1
    YS    (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 20% cold worked : 11722|13|1|2
    YS    (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 30% cold worked : 11722|13|1|3
    YS    (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 40% cold worked : 11722|13|1|4
    YS    (N*):    effect of forging temperature on RT properties : forged at 1204 °C (2200 °F), water quenched : 11722|13|2|0
    YS    (N*):    effect of forging temperature on RT properties : forged at 1149 °C (2100 °F), water quenched : 11722|13|2|1
    YS    (N*):    effect of forging temperature on RT properties : forged at 1093 °C (2000 °F), water quenched : 11722|13|2|2
    YS    (N*):    effect of forging temperature on RT properties : forged at 1038 °C (1900 °F), water quenched : 11722|13|2|3
    YS    (N*):    effect of forging temperature on RT properties : forged at 982 °C (1800 °F), water quenched : 11722|13|2|4
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 0% cold worked : 11722|29|0|0
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 10% cold worked : 11722|29|0|1
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 20% cold worked : 11722|29|0|2
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 30% cold worked : 11722|29|0|3
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 40% cold worked : 11722|29|0|4
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 50% cold worked : 11722|29|0|5
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 60% cold worked : 11722|29|0|6
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 70% cold worked : 11722|29|0|7
    %El   (N*):    effect of cold work on RT properties, 2.54 mm (0.1 inch) diameter wire : 80% cold worked : 11722|29|0|8
    %El   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 0% cold worked : 11722|29|1|0
    %El   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 10% cold worked : 11722|29|1|1
    %El   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 20% cold worked : 11722|29|1|2
    %El   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 30% cold worked : 11722|29|1|3
    %El   (N*):    effect of cold work on RT properties, 25.4 mm (1 inch) diameter wire : 40% cold worked : 11722|29|1|4
    %El   (N*):    effect of forging temperature on RT properties : forged at 1204 °C (2200 °F), water quenched : 11722|29|2|0
    %El   (N*):    effect of forging temperature on RT properties : forged at 1149 °C (2100 °F), water quenched : 11722|29|2|1
    %El   (N*):    effect of forging temperature on RT properties : forged at 1093 °C (2000 °F), water quenched : 11722|29|2|2
    %El   (N*):    effect of forging temperature on RT properties : forged at 1038 °C (1900 °F), water quenched : 11722|29|2|3
    %El   (N*):    effect of forging temperature on RT properties : forged at 982 °C (1800 °F), water quenched : 11722|29|2|4

return to listing

UNS S31050

    RHO   (N*):    solid : 1098|2|0|-1
    SIGMA (N*):    solid : 1098|10|0|-1

return to listing

UNS S31254

    SSC    (N):    cold-rolled sheet, quenched and annealed : tested at 20 °C (68 °F), unknown strain rate : 1099|4|0|0

return to listing

UNS S32654

    SSC    (N):    cold-rolled sheet, quenched and annealed : tested at 20 °C (68 °F), unknown strain rate : 1112|4|0|0
    SSCC   (N):    0.01/s : tested at 950 °C (1742 °F) : 1112|12|0|0
    SSCC   (N):    0.01/s : tested at 1000 °C (1832 °F) : 1112|12|0|1
    SSCC   (N):    0.01/s : tested at 1050 °C (1922 °F) : 1112|12|0|2
    SSCC   (N):    0.01/s : tested at 1100 °C (2012 °F) : 1112|12|0|3
    SSCC   (N):    0.01/s : tested at 1150 °C (2102 °F) : 1112|12|0|4
    SSCC   (N):    0.01/s : tested at 1200 °C (2192 °F) : 1112|12|0|5
    SSCC   (N):    0.01/s : tested at 1250 °C (2282 °F) : 1112|12|0|6
    SSCC   (N):    0.1/s : tested at 950 °C (1742 °F) : 1112|12|1|0
    SSCC   (N):    0.1/s : tested at 1000 °C (1832 °F) : 1112|12|1|1
    SSCC   (N):    0.1/s : tested at 1050 °C (1922 °F) : 1112|12|1|2
    SSCC   (N):    0.1/s : tested at 1100 °C (2012 °F) : 1112|12|1|3
    SSCC   (N):    0.1/s : tested at 1150 °C (2102 °F) : 1112|12|1|4
    SSCC   (N):    0.1/s : tested at 1200 °C (2192 °F) : 1112|12|1|5
    SSCC   (N):    0.1/s : tested at 1250 °C (2282 °F) : 1112|12|1|6
    SSCC   (N):    1/s : tested at 950 °C (1742 °F) : 1112|12|2|0
    SSCC   (N):    1/s : tested at 1000 °C (1832 °F) : 1112|12|2|1
    SSCC   (N):    1/s : tested at 1050 °C (1922 °F) : 1112|12|2|2
    SSCC   (N):    1/s : tested at 1100 °C (2012 °F) : 1112|12|2|3
    SSCC   (N):    1/s : tested at 1150 °C (2102 °F) : 1112|12|2|4
    SSCC   (N):    1/s : tested at 1200 °C (2192 °F) : 1112|12|2|5
    SSCC   (N):    1/s : tested at 1250 °C (2282 °F) : 1112|12|2|6
    SSCC   (N):    5/s : tested at 950 °C (1742 °F) : 1112|12|3|0
    SSCC   (N):    5/s : tested at 1000 °C (1832 °F) : 1112|12|3|1
    SSCC   (N):    5/s : tested at 1050 °C (1922 °F) : 1112|12|3|2
    SSCC   (N):    5/s : tested at 1100 °C (2012 °F) : 1112|12|3|3
    SSCC   (N):    5/s : tested at 1150 °C (2102 °F) : 1112|12|3|4
    SSCC   (N):    5/s : tested at 1200 °C (2192 °F) : 1112|12|3|5
    SSCC   (N):    5/s : tested at 1250 °C (2282 °F) : 1112|12|3|6
    SSCC   (N):    10/s : tested at 950 °C (1742 °F) : 1112|12|4|0
    SSCC   (N):    10/s : tested at 1000 °C (1832 °F) : 1112|12|4|1
    SSCC   (N):    10/s : tested at 1050 °C (1922 °F) : 1112|12|4|2
    SSCC   (N):    10/s : tested at 1100 °C (2012 °F) : 1112|12|4|3
    SSCC   (N):    10/s : tested at 1150 °C (2102 °F) : 1112|12|4|4
    SSCC   (N):    10/s : tested at 1200 °C (2192 °F) : 1112|12|4|5
    SSCC   (N):    10/s : tested at 1250 °C (2282 °F) : 1112|12|4|6

return to listing

UNS S32760 / J93380

    SSC    (N):    solution treated : tested at 20 °C (68 °F), 1 x 10⁻⁴/s : 1113|4|0|0
    SSC    (N):    solution treated : tested at 20 °C (68 °F), 0.001/s : 1113|4|0|1
    SSC    (N):    solution treated : tested at 20 °C (68 °F), 0.01/s : 1113|4|0|2
    SSC    (N):    solution treated, H charged : tested at 20 °C (68 °F), 1 x 10⁻⁴/s : 1113|4|1|0
    SSC    (N):    solution treated, H charged : tested at 20 °C (68 °F), 0.001/s : 1113|4|1|1
    SSC    (N):    solution treated, H charged : tested at 20 °C (68 °F), 0.01/s : 1113|4|1|2

return to listing

UNS S42010

    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, quenched to 115 °C (239 °F), partitioned at 400 °C (752 °F) : 11730|4|0|0
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, quenched to 145 °C (293 °F), partitioned at 400 °C (752 °F) : 11730|4|0|1
    SSC    (N):    Q & P : tested at 20 °C (68 °F), 0.001/s, quenched to 170 °C (338 °F), partitioned at 400 °C (752 °F) : 11730|4|0|2

return to listing

W - 7 Ni - 3 Fe

    SSC    (N):    liquid phase sintered plate : tested at 23 °C (73 °F), 0.001/s, 0% reduction : 2369|4|2|0
    SSC    (N):    liquid phase sintered plate : tested at 23 °C (73 °F), 0.001/s, 62% reduction : 2369|4|2|1
    SSC    (N):    liquid phase sintered plate : tested at 23 °C (73 °F), 0.001/s, 74% reduction : 2369|4|2|2
    SSC    (N):    liquid phase sintered plate : tested at 23 °C (73 °F), 0.001/s, 87% reduction : 2369|4|2|3
    UTS   (N*):    liquid phase sintered plate : 0% reduction : 2369|5|0|0
    UTS   (N*):    liquid phase sintered plate : 62% reduction : 2369|5|0|1
    UTS   (N*):    liquid phase sintered plate : 74% reduction : 2369|5|0|2
    UTS   (N*):    liquid phase sintered plate : 87% reduction : 2369|5|0|3
    YS    (N*):    liquid phase sintered plate : 0% reduction : 2369|13|0|0
    YS    (N*):    liquid phase sintered plate : 62% reduction : 2369|13|0|1
    YS    (N*):    liquid phase sintered plate : 74% reduction : 2369|13|0|2
    YS    (N*):    liquid phase sintered plate : 87% reduction : 2369|13|0|3
    %El   (N*):    liquid phase sintered plate : 0% reduction : 2369|29|0|0
    %El   (N*):    liquid phase sintered plate : 62% reduction : 2369|29|0|1
    %El   (N*):    liquid phase sintered plate : 74% reduction : 2369|29|0|2
    %El   (N*):    liquid phase sintered plate : 87% reduction : 2369|29|0|3

return to listing

W7 (New)

    SSC       :    solution treated : tested at 20 °C (68 °F), 0.01/s : 15101|4|0|0
    SSC       :    solution treated & aged : tested at 20 °C (68 °F), 0.01/s : 15101|4|1|0
    SSCC      :    solution treated : tested at 20 °C (68 °F), 0.01/s : 15101|12|0|0
    SSCC      :    solution treated & aged : tested at 20 °C (68 °F), 0.01/s : 15101|12|1|0

return to listing

YCa₄O(BO₃)₃ (New)

    SH        :    solid : 15111|9|0|-1
    HC        :    solid : 15111|17|0|-1

return to listing

YSS YXR7

    YSC   (N*):    hardness HRC 62 : 0.02% offset : 12737|21|0|0

return to listing

Zr₄₁Ti₁₄Cu₁₂_.₅Ni₁₀Be₂₂_.₅ (New)

    E     (*):    solid : 15117|3|0|-1
    FSN       :    as-cast : tested at 20 °C (68 °F), R = -1, axial at 30 Hz, maximum stress : 15117|6|0|0
    FSN       :    as-cast : tested at 20 °C (68 °F), R = -1, ultrasonic at 20 kHz, maximum stress : 15117|6|0|1
    FSN       :    as-cast : tested at 20 °C (68 °F), R = -1, combined axial at 30 Hz and ultrasonic at 20 kHz, maximum stress : 15117|6|0|2
    G     (*):    solid : 15117|11|0|-1
    YS    (*):    solid : typical value : 15117|13|0|0
    v     (*):    solid : 15117|19|0|-1
    D     (*):    solid : 15117|24|0|-1
    K     (*):    solid : 15117|27|0|-1

return to listing